VS XC100M12X00EP

Article no.: 11086399

Integrated flash controller
User management
Password protection
Backup & Restore function
Coordinate transformation
flexible result conjunction
Download VeriSens^® Application Suite: www.baumer.com/vs-sw

Technical data

show all

General data

Resolution

1280 × 960 px

Sensor type

1/3″ CCD, monochrome

Illumination

direct connection (integrated flash controller)

Illumination connection

as accessory

High-resolution mode

max. 12 inspections per second

High-speed mode (limited resolution)

max. 25 inspections per second

Number of jobs (products)

≤ 255

Features per job

Signal processing

Baumer FEX^® 4.0

Defect image memory

Lens

C-mount

Electrical data

Voltage supply range +Vs

18 … 30 V DC

Power consumption

Typical 5 W (I_max = 1.5 A at 24 V)

Digital inputs

5 inputs (8 … 30 V)
trigger
job selection
external teach-in
encoders (CH-A, CH-B) 500 kHz

Digital outputs

5 outputs (PNP)
Pass / Fail
Flash Sync
Alarm
Camera Ready
Output Enable

Initial setup

Ethernet (10BASE-T / 100BASE-TX)

Process interface

TCP/UDP (Ethernet)

Visualization

web interface

Mechanical data

Width

53 mm (without lens/tube)

Height

99.5 mm (without lens/tube)

Depth

49.8 mm (without lens/tube)

Weight

≤ 300 g (without lens/tube)

Material

housing: aluminum
cover glass: PMMA

Environmental conditions

Operating temperature

+5 … +55 °C @ T = measurement point

Storage temperature

-20 … +70 °C

Case temperature

max. +50 °C

Humidity

0 … 90 % (non-condensing)

Protection class

IP 67 (with tube)

Vibration load

IEC 60068-2-6
IEC 60068-2-64

Mechanical shock resistance

EN 60068-2-27

Feature checks

Part location

Part location on contours
Part location on edges
Part location on circle
Part location on text line

Geometry

Distance
circle
angle
count edges
point position
edge characteristics

Feature comparison

count contour points
contour comparison
brightness
contrast
area size
count areas
pattern comparison

Integrated flash controller

Voltage

12 V DC or 24 V DC (permanent)
24 V DC or 48 V DC (pulsed)

Current

I_max = 800 mA at 24 V DC (permanent) (±10 %, at least ± 100 mA, at 25 °C)
I_max = 4 A at 48 V DC (pulsed) (+10/-20 %, at least ± 100 mA, at 25 °C)

Flash time

max. 1 ms (Duty Cycle max. 1:10)

Conformity

Conformity

CE
RoHS
KC (R-R-BkR-VeriSens-XC-IP)

Non-volatile memory

Flash memory size

256 Mbit Flash S29GL256P10FFI010

Software

show all

Software packages

VeriSens Application Suite v2.11.0 (Windows)
- Download
VeriSens S7 Function Library
- Request package

Software

Baumer VeriSens Lens Tool v2.3.6
- EN (zip | 223 KB)

Downloads

show all

Data sheet

Data sheet – VS XC100M12X00EP
- DE (pdf | 1 MB)
Data sheet – VS XC100M12X00EP
- EN (pdf | 1 MB)

Quickstart

Quick Start Guide VeriSens vision sensors
- EN/DE/FR/IT/ES/ZH/KO/TH/JP (pdf | 7 MB)

Operating Manual

Technical documentation VeriSens ID / CS / XF / XC

Certificates / approvals

CE certification
- EN/DE/BG/CZ/DK/ES/FI/FR/GR/HU/IT/LT/LV/NL/NO/PL/PT/RO/SK/SI (pdf | 280 KB)
KC registration
- KO/EN (pdf | 679 KB)

Application notes

Application Notes
- Link

CAD

VS XC100M12X00EP / STEP
- (zip | 1 MB)
XC Tube / STEP
- (zip | 23 KB)
XC Tube Modul 6mm / STEP
- (zip | 40 KB)
XC Tube Modul / STEP
- (zip | 45 KB)

EPLAN

Link to dataportal
- Link to Data Portal

Drawings

show all

Accessories

show all

Power supply

Power Supply 24V/1.0A Int. DC Connector

Article no.: 11079750

power supply 24V/1,0A with adapters for EU, US, UK AU, KR
in combination with "Cable power adapter M12/DC connector" (11048083) suitable for VCXG.I(.XT), VLXT, VAX and VeriSens

Starter Kit

Starter Kit VeriSens Universal

Article no.: 11075442

confectioned connection cable M12/12-pin with power supply 24V/1.0A
Ethernet cable
90° angled fixation bracket incl. screws
screw driver
Application Suite (Windows) via Download
VeriSens not included

Lens accessories

	XC Tube Article no.: 11088325	lens protection for C-mount lenses Optional XC Tube extension with XC Tube Module 6mm (11115649) or XC Tube Module (11089149), length 12 mm. Use of several Tube Modules possible. thread: M47 length 44 mm
	XC Tube Module 12 mm Article no.: 11089149	modular extension of the lens protection of C-mount lenses thread: M47 length 12 mm
	Filter CL/27 (R2) ROT PENTAX Article no.: 11006551	Ricoh color filter (red)
	Close-up ring set ZVS-FP-RGST six-piece Article no.: 11010529	Close-up ring set ZVS-FP-RGST six-piece 0,5, 1, 5, 10, 20, 40 mm
	Filter Pol PENTAX PL27 Article no.: 11092000	Ricoh polarization filter linear filter thread
	Filter IR block 1''-32 H2,5mm Article no.: 11095022	IR - blocking filter, C-mount screwable into C-mount housing (independend from lens)
	Filter <780nm block 1“-32 H2,5mm Article no.: 11095023	daylight blocking filter up to 780nm screwable into C-mount housing (independend from lens)
	Set Filter <780nm block 1"-32 H2,5mm Article no.: 11097576	daylight blocking filter up to 780nm screwable into C-mount housing (independend from lens) set with screw-in tool
	XC Tube Module 6mm Article no.: 11115649	modular extension of the lens protection of C-mount lenses thread: M47 length 6 mm
	ZVI-FILTER POL. PL30.5 C91353 Article no.: 11175428	Ricoh polarization filter linear filter thread M30.5
	ZVI-Filter Pol. PL40.5 C91301 Article no.: 11167713	Ricoh polarization filter linear filter thread M40.5

Lens

	Obj CITRINE 1,4/17 C Article no.: 10170041	Schneider Kreuznach lens 17 mm F 1,4-11 format 2/3" M.O.D. 0,16 m C-mount
	Obj CITRINE 1,4/23 C Article no.: 11035165	Schneider Kreuznach lens 23 mm F 1,4-11 format 2/3" M.O.D. 0,211 m C-mount
	Obj TOURMALINE 2,8/50 C Article no.: 11037739	Schneider Kreuznach lens 50 mm F 2,8-16 format 1.3" M.O.D. 0,135 m C-mount
	Obj CITRINE 1,8/4,8 C Article no.: 11035760	Schneider Kreuznach lens 4,8 mm F 1,8-8 format 2/3" M.O.D. 0,037 m C-mount
	Obj CITRINE 1,4/8 C Article no.: 11035932	Schneider Kreuznach lens 8 mm F 1.4-8 format 2/3" M.O.D. 0.072 m C-mount
	Obj TURQUOISE 1,9/10 C Article no.: 11037743	Schneider Kreuznach lens 10 mm F 1,9-16 format 1" M.O.D. 0,092 m C-mount
	Obj CITRINE 1,4/12 C Article no.: 10170038	Schneider Kreuznach lens 12 mm F 1,4-11 format 2/3" M.O.D. 0,614 m C-mount
	Obj TURQUOISE 1,8/16 C Article no.: 11076106	Schneider Kreuznach lens 16 mm F 1,8-22 format 1" M.O.D. 0,155 m C-mount
	Obj LINOS MeVis C 25mm/f1,6 Article no.: 11051404	Linos lens 25 mm F 1,6-16 format 1" M.O.D. 0,26 m C-mount
	Obj Kowa LM12HC-SW 12,5mm/f1,4 Article no.: 11097919	Kowa lens 12,5 mm F 1,4-16 format 1" locating screw for aperture and focus via RS485 interface M.O.D. 0,9 m C-mount
	Obj Kowa LM25HC 25mm/f1,4 Article no.: 11092602	Kowa lens 25 mm F 1,4-16 format 1" M.O.D. 0,3 m C-mount
	Obj Kowa LM25HC-SW 25mm/f1,4 Article no.: 11092603	Kowa lens 25 mm F 1,4-16 format 1" M.O.D. 0,3 m SWIR optimized C-mount
	Obj Kowa LM35HC-SW 35mm/f1,4 Article no.: 11092605	Kowa lens 35 mm F 1,4-16 format 1" M.O.D. 0,4 m SWIR optimized C-mount
	Obj Kowa LM8JCM 8mm/f1,4 Article no.: 11092788	Kowa lens 8 mm F 1,4 format 2/3" M.O.D. 0,1 m C-mount
	Obj Kowa LM8JC10M 8,5mm/1,8 Article no.: 11091819	Kowa lens 8,5 mm F 1,6-22 format 2/3" M.O.D. 0,1 m locating screw for aperture and focus C-mount
	ZVL-LM3NCM 3,5mm/f2,4 Article no.: 11116658	Kowa lens 3,5 mm F 2,4-14 format 1/1.8'' M.O.D. 0,1 m C-mount
	ZVL-FL-CC0814A-2M Article no.: 11150223	Ricoh Imaging lens 8 mm F 1,4-16 format 2/3" M.O.D. 0,1 m locating screw for aperture and focus C-mount
	ZVL-FL-CC1214A-2M Article no.: 11150226	Ricoh Imaging lens 12 mm F 1,4-16 format 2/3" M.O.D. 0,1 m locating screw for aperture and focus C-mount
	ZVL-FL-CC1614A-2M Article no.: 11150228	Ricoh Imaging lens 16 mm F 1,4-16 format 2/3" M.O.D. 0,1 m locating screw for aperture and focus C-mount
	ZVL-FL-CC2514A-2M Article no.: 11150229	Ricoh Imaging lens 25 mm F 1,4-16 format 2/3" M.O.D. 0,1 m locating screw for aperture and focus C-mount
	ZVL-FL-CC5024A-2M Article no.: 11150230	Ricoh Imaging lens 50 mm F 2,4-22 format 2/3" M.O.D. 0,3 m locating screw for aperture and focus C-mount
	ZVL-FL-HC0614-2M Article no.: 11008992	Ricoh Imaging lens 6 mm F 1,4-16 format 1/2" M.O.D. 0,1 m locating screw for aperture and focus C-mount
	ZVL-FL-HC1214-2M Article no.: 11004362	Ricoh Imaging lens 12 mm F 1,4-16 format 1/2" M.O.D. 0,25 m locating screw for aperture and focus C-mount
	ZVL-FL-CC1614-2M Article no.: 10170039	Ricoh Imaging lens 16 mm F 1,4-16 format 2/3" M.O.D. 0,25 m locating screw for aperture and focus C-mount
	ZVL-FL-CC2514-2M Article no.: 11002222	Ricoh Imaging lens 25 mm F 1,4-16 format 2/3" M.O.D. 0,25 m locating screw for aperture and focus C-mount
	ZVL-FL-CC3516-2M Article no.: 11003417	Ricoh Imaging lens 35 mm F 1,6-16 format 2/3" M.O.D. 0,35 m locating screw for aperture and focus C-mount
	ZVL-FL-CC5028-2M Article no.: 11012785	Ricoh Imaging lens 50 mm F 2,8-22 format 2/3" M.O.D. 0,9 m locating screw for aperture and focus C-mount
	ZVL-FL-CC7528-2M Article no.: 11003041	Ricoh Imaging lens 75 mm F 2,8 32 format 2/3" M.O.D. 0,7 m locating screw for aperture and focus C-mount
	ZVL-FL-BC2518-9M Article no.: 11154325	Ricoh Imaging lens 25 mm F 1,8-16 format 1,1" M.O.D. 0,1 m locating screw for aperture and focus C-mount
	ZVL-FL-BC3518-9M Article no.: 11154326	Ricoh Imaging lens 35 mm F 1,6-16 format 1,1" M.O.D. 0,15 m locating screw for aperture and focus C-mount
	ZVL-FL-BC5024-9M Article no.: 11154327	Ricoh Imaging lens 50 mm F 2,4-22 format 1,1" M.O.D. 0,2 m locating screw for aperture and focus C-mount
	Obj Kowa LM12HC 12mm/f1,4 Article no.: 11092600	Kowa lens 12,5 mm F 1,4-16 format 1" M.O.D. 0,3 m C-mount
	Obj Kowa LM16HC 16mm/f1,4 Article no.: 11092601	Kowa lens 16 mm F 1,4-16 format 1" M.O.D. 0,3 m C-mount
	ZVL-V0828-MPY Article no.: 11181608	Computar lens 8 mm F 2,8-16 format 1,1" M.O.D. 0,2 m locating screw for aperture and focus C-mount
	ZVL-V1228-MPY Article no.: 11181609	Computar lens 12 mm F 2,8-16 format 1,1" M.O.D. 0,3 m locating screw for aperture and focus C-mount
	ZVL-V1628-MPY Article no.: 11181640	Computar lens 16 mm F 2,8-16 format 1,1" M.O.D. 0,3 m locating screw for aperture and focus C-mount
	ZVL-V2528-MPY Article no.: 11181641	Computar lens 25 mm F 2,8-16 format 1,1" M.O.D. 0,3 m locating screw for aperture and focus C-mount
	ZVL-V3528-MPY Article no.: 11181642	Computar lens 35 mm F 2,8-16 format 1,1" M.O.D. 0,3 m locating screw for aperture and focus C-mount
	ZVL-V5028-MPY Article no.: 11181643	Computar lens 50 mm F 2,8-16 format 1,1" M.O.D. 0,55 m locating screw for aperture and focus C-mount

Cable

	ESG 34JP0200GS Shielded cable 12 wires, female connector, 2,0 m Article no.: 11201118	shielded process interface cable M12/12-pin female connector to open wires cable carrier compatible suitable for robotic applications (+/- 180°/m, min. 500.000 torsion cycles) length 2,0 m
	ESG 34JP0500GS Shielded cable 12 wires, female connector, 5,0 m Article no.: 11195097	shielded process interface cable M12/12-pin female connector to open wires cable carrier compatible suitable for robotic applications (+/- 180°/m, min. 500.000 torsion cycles) length 5,0 m
	ESG 34JP1000GS Shielded cable 12 wires, female connector, 10,0 m Article no.: 11195098	shielded process interface cable M12/12-pin female connector to open wires cable carrier compatible suitable for robotic applications (+/- 180°/m, min. 500.000 torsion cycles) length 10,0 m
	ESG 34JP2000GS Shielded cable 12 wires, female connector, 20,0 m Article no.: 11195099	shielded process interface cable M12/12-pin female connector to open wires cable carrier compatible suitable for robotic applications (+/- 180°/m, min. 500.000 torsion cycles) length 20,0 m
	ESW 33JP0200GS 90° shielded cable 12 wires, female connector, 2,0 m Article no.: 11201128	shielded process interface cable 90° angled M12/12-pin female connector to open wires cable carrier compatible suitable for robotic applications (+/- 180°/m, min. 500.000 torsion cycles) length 2,0 m
	ESW 33JP0500GS 90° shielded cable 12 wires, female connector, 5,0 m Article no.: 11195094	shielded process interface cable 90° angled M12/12-pin female connector to open wires cable carrier compatible suitable for robotic applications (+/- 180°/m, min. 500.000 torsion cycles) length 5,0 m
	ESW 33JP1000GS 90° shielded cable 12 wires, female connector, 10,0 m Article no.: 11195095	shielded process interface cable 90° angled M12/12-pin female connector to open wires cable carrier compatible suitable for robotic applications (+/- 180°/m, min. 500.000 torsion cycles) length 10,0 m
	ESW 33JP2000GS 90° shielded cable 12 wires, female connector, 20,0 m Article no.: 11195096	shielded process interface cable 90° angled M12/12-pin female connector to open wires cable carrier compatible suitable for robotic applications (+/- 180°/m, min. 500.000 torsion cycles) length 20,0 m
	KSG 34A/KSG45AR0500G/E Article no.: 11700905	M12, male, D-coded, 4-poles; PUR, 500 cm, shielded; RJ45, male, 4-poles Suitable for robotics ± 180 °/m Head A: IP67; Head B: IP20 Cable: good resistance against flames, oils
	KSG 34A/KSG45AR1000G/E Article no.: 11700904	M12, male, D-coded, 4-poles; PUR, 1000 cm, shielded; RJ45, male, 4-poles Suitable for robotics ± 180 °/m Head A: IP67; Head B: IP20 Cable: good resistance against flames, oils
	KSG 34A/KSG45AR0200G/E Article no.: 11700903	M12, male;, D-coded, 4-poles PUR, 200 cm, shielded; RJ45, male, A-coded, 4-poles Suitable for robotics ± 180 °/m Head A: IP67; Head B: IP20 Cable: good resistance against flames, oils
	KSW 33A/KSG45AR0200G/E Article no.: 11701260	M12, male, D-coded, 4-poles; PUR, 200 cm, shielded; RJ45, male, 4-poles Suitable for robotics ± 180 °/m Head A: IP67; Head B: IP20 Cable: good resistance against flames, oils
	KSW 33A/KSG45AR0500G/E Article no.: 11701261	M12, male, D-coded, 4-poles; PUR, 500 cm, shielded; RJ45, male, 4-poles Suitable for robotics ± 180 °/m Head A: IP67; Head B: IP20 Cable: good resistance against flames, oils
	KSW 33A/KSG45AR1000G/E Article no.: 11701262	M12, male, D-coded, 4-poles; PUR, 1000 cm, shielded; RJ45, male, 4-poles Suitable for robotics ± 180 °/m Head A: IP67; Head B: IP20 Cable: good resistance against flames, oils
	Cable Power Adapter M12/DC Connector Article no.: 11048083	shielded adapter connection cable M12/12-pin male connector to confectioned DC connector length 2,0 m manufactured cable: 11201118 ESG 34JP0200GS

Mountings and heat sinks

	Fixation bracket VeriSens 1 Article no.: 10159905	Fixation bracket for VeriSens vision sensors incl. screws (hexagon socket) and washers
	Fixation bracket VeriSens 2 Article no.: 10159906	Fixation bracket for VeriSens vision sensors incl. screws (hexagon socket) and washers 90° angled
	VeriSens laboratory stand Article no.: 11051407	stand for VeriSens content: articulated arm, baseplate, one white and one black underlayment, VeriSens mounting with 2 screws (hexagon socket) max. hight of device mounting approx. 28 cm
	VS Mounting Adapter Article no.: 11177010	Fixation bracket for VeriSens vision sensors incl. screws (hexagon socket) and washers 90° angled

Illumination accessories

	VB Fix Kit FLDR-i90B small Illumination fixation kit Article no.: 11092203	set of fixation brackets for LED ring light FLDR-i90B and VeriSens^® XC series length: 57 mm
	VB Fix Kit FLDR-i90B large Illumination fixation kit Article no.: 11092204	set of fixation brackets for LED ring light FLDR-i90B and VeriSens^® XC series length: 93 mm
	VB Fix Kit RONDO-LX small Article no.: 11136136	set of fixation brackets for LED ring light RONDO-LX and VeriSens^® XC series length: 57 mm
	VB Fix Kit RONDO-LX large Article no.: 11136139	set of fixation brackets for LED ring light RONDO-LX and VeriSens^® XC series length: 93 mm
	ZVI-LUMIMAX T1 AdapterCable Illumination Adapter cable for illumination Article no.: 11175008	adapter cable to connect LUMIMAX Spot5W illuminations to M12/12-pin connector suitable for VeriSens, VCXG.I and VLXT
	ZVI-VB_Fix_Kit_Industrial_Light Illumination fixation kit Article no.: 11076264	VeriSens^® illumination fix kit Scales for the documentation of the application setup, also for its replication Use in combination with illumination adapter (for LUMIMAX Spot5W: ZVI-Fix_Kit_Adapter_Spot5W (11175009)) Length: 130 mm
	ZVI-Fix_Kit_Adapter_Spot5W Article no.: 11175009	mounting adapter to mount LUMIMAX Spot5W illuminations to ZVI-VB_Fix_Kit_Industrial_Light (11076264)
	ZVI-FLDR_i90B_DP_Diffuser A1_421 Article no.: 11167413	Diffusor with drilling holes and screws for Falcon illumination FLDR-i90B
	ZVI-Polarizer_FLDR_i90B Article no.: 11167410	Polarization filter for Falcon illumination FLDR-i90B
	ZVI-Polarizer_holder_FLDR_i90B Article no.: 11167411	Mounting adapter for polarization filter for Falcon FLDR-i90B illuminations: ZVI-Polarizer_FLDR-i90B (11167410) incl. screws

Illumination

	ZVI-LED Spot5WFL-W/SPS-220 Article no.: 11175031	LED spot light white 19… 30 V cable length: 0,15 m diameter: 34 mm adjustable glass optics for spot or broad light integrated flash controller and potentiometer (brightness and exposure time) direct connection to M12/12-pin connector thanks to T-adapter cable (ZVI-LUMIMAX T1-adapter cable illumination (11175008)) maximum exposure time 220 µs (maximum frequency 35 Hz)
	ZVI-LED Spot5WFL-R/SPS-220 Article no.: 11175034	LED spot light red 19… 30 V cable length: 0,15 m diameter: 34 mm adjustable glass optics for spot or broad light integrated flash controller and potentiometer (brightness and exposure time) direct connection to M12/12-pin connector thanks to T-adapter cable (ZVI-LUMIMAX T1-adapter cable (11175008)) maximum exposure time 220 µs (maximum frequency 35 Hz)
	ZVI-LED Spot5WFL-IR850/SPS-220 Article no.: 11175035	LED spot light infrared 19… 30 V cable length: 0,15 m diameter: 34 mm adjustable glass optics for spot or broad light integrated flash controller and potentiometer (brightness and exposure time) direct connection to M12/12-pin connector thanks to T-adapter cable (ZVI-LUMIMAX T1-Adapter cable illumination (11175008)) maximum exposure time 220 µs (maximum frequency 35 Hz)
	ZVI-LED Spot5WFL-B/SPS-220 Article no.: 11175036	LED spot light blue 19… 30 V cable length: 0,15 m diameter: 34 mm adjustable glass optics for spot or broad light integrated flash controller and potentiometer (brightness and exposure time) direct connection to M12/12-pin connector thanks to T-adapter cable (ZVI-LUMIMAX T1-Adapter cable illumination (11175008)) maximum exposure time 220 µs (maximum frequency 35 Hz)
	FLDR-i90B-W Article no.: 11085869	flashable LED ring light white 24 V voltage-driven (equipped with integrated pre-resistor) cable length: 0,3 m diameter: 94 mm
	FLDL-TP-Si36-W Article no.: 11086536	flashable LED back light white diffuse 24 V voltage-driven (equipped with integrated pre-resistor) cable length: 1 m dimensions: 47 mm × 47 mm × 15 mm housing
	FLDL-TP-Si200x100-W Article no.: 11086537	flashable LED back light white diffuse 24 V voltage-driven (equipped with integrated pre-resistor) cable length: 1 m dimensions: 116 mm × 228 mm × 23,5 mm housing
	FLDL-TP-Si85x77-W Article no.: 11086538	flashable LED back light white diffuse 24 V voltage-driven (equipped with integrated pre-resistor) cable length: 1 m dimensions: 95 mm × 95 mm × 15 mm housing
	FLDL-i150x15-W Article no.: 11086539	flashable LED bar light white diffuse 24 V voltage-driven (equipped with integrated pre-resistor) cable length: 1 m dimensions: 158 mm × 17 mm × 20 mm housing
	FFPR-i100-W Article no.: 11086540	flashable LED dark field illumination white diffuse 24 V voltage-driven (equipped with integrated pre-resistor) cable length: 0,3 m diameter: 100 mm
	FLDR-i90B-IR24 Article no.: 11090900	flashable LED ring light IR 875 nm 24 V voltage-driven (equipped with integrated pre-resistor) cable length: 0,3 m diameter: 94 mm
	FLFL-Si60-IR24 Article no.: 11095910	flashable LED back light NIR diffuse 24 V voltage-driven (equipped with integrated pre-resistor) cable length: 1 m dimensions: 94 mm × 94 mm × 10 mm housing
	ZVI-HELIOS-130_IP65_weiß_80°_24VDC_M8 HELIOS-130 IP65 white 80° 24VDC with M8 connector Article no.: 11701627	flashable LED ring light white radiation angle 80° 24 V voltage-driven (equipped with integrated pre-resistor) M8/4-pin connector (cable has to be ordered separately) diameter: 134 mm IP65 protection
	ZVI-RONDOLX_24VDC_IR850NM_120° RONDO-LX IR 850nm 120° 24VDC with M8 connector Article no.: 11130150	flashable LED ring light infrared (850 nm) radiation angle 120° 24 V voltage-driven (equipped with integrated pre-resistor) M8/4-pin connector (cable has to be ordered separately) diameter: 101 mm
	ZVI-RONDOLX_24VDC_IR850NM_50° RONDO-LX IR 850nm 50° 24VDC with M8 connector Article no.: 11130176	flashable LED ring light infrared (850 nm) radiation angle 50° 24 V voltage-driven (equipped with integrated pre-resistor) M8/4-pin connector (cable has to be ordered separately) diameter: 101 mm
	ZVI-RONDOLX_24VDC_WEIß_120° RONDO-LX white 120° 24VDC with M8 connector Article no.: 11130179	flashable LED ring light white radiation angle 120° 24 V voltage-driven (equipped with integrated pre-resistor) M8/4-pin connector (cable has to be ordered separately) diameter: 101 mm
	ZVI-HILIGHT80_24VDC_WEIß HI-LIGHT-80 white 24VDC with M8 connector Article no.: 11130181	flashable LED back light white diffuse radiation angle 80° diameter: 94 mm 24 V voltage-driven (equipped with integrated pre-resistor) M8/4-pin connector dimensions: 87 mm × 87 mm × 20 mm housing
	ZVI-HILIGHT120_24VDC_WEIß HI-LIGHT-120 white 24VDC with M8 connector Article no.: 11130182	flashable LED back light white diffuse radiation angle 120° diameter: 94 mm 24 V voltage-driven (equipped with integrated pre-resistor) M8/4-pin connector (cable has to be ordered separately) dimensions: 127 mm × 127 mm × 20 mm housing
	ZVI-ARCUSM_24VDC_WEIß_120° ARCUS-M white 24VDC with M8 connector Article no.: 11130183	flashable LED dark field illumination white radiation angle 120° 24 V voltage-driven (equipped with integrated pre-resistor) M8/4-pin connector (cable has to be ordered separately) diameter: 120 mm
	ZVI-LOGO2_24VDC_ROT617NM_30° LOGO-2 red 617nm 30° 24VDC with M8 connector Article no.: 11130184	flashable LED bar light red (617 nm) radiation angle 30° 24 V voltage-driven (equipped with integrated pre-resistor) M8/4-pin connector (cable has to be ordered separately) dimensions: 74 mm × 15 mm × 17 mm housing
	ZVI-TOPLINED1_24VDC_WEIß_120° TOP-LINE-D1 white 120° 24VDC M8 1-canal Article no.: 11130185	flashable LED bar light white radiation angle 120° 24 V voltage-driven (equipped with integrated pre-resistor) M8/4-pin connector (cable has to be ordered separately) dimensions: 78 mm × 25 mm × 23 mm housing
	ZVI-TOPLINED1_24VDC_SHWEIß_120° TOP-LINE-D1 SH white 120° 24VDC M8 1-canal Article no.: 11130186	flashable LED bar light SH white radiation angle 120° 24 V voltage-driven (equipped with integrated pre-resistor) M8/4-pin connector (cable has to be ordered separately) dimensions: 78 mm × 25 mm × 23 mm housing
	ZVI-TOPLINED1_24VDC_ROT617NM_30° TOP-LINE-D1 red 617nm 30° 24VDC M8 1-canal Article no.: 11130187	flashable LED bar light red (617 nm) radiation angle 30° 24 V voltage-driven (equipped with integrated pre-resistor) M8/4-pin connector (cable has to be ordered separately) dimensions: 78 mm × 25 mm × 23 mm housing
	ZVI-TOPLIGHT80_24VDC_rot617nm_30° TOPLIGHT80 red 617nm 30° 24VDC Article no.: 11135012	flashable LED incident light red (617 nm) radiation angle 30° 24 V voltage-driven (equipped with integrated pre-resistor) M8/4-pin connector (cable has to be ordered separately) dimensions: 87 mm × 87 mm × 20 mm housing
	FLDR-i90B-SR24 Article no.: 11154321	flashable LED ring light red (626 nm) 24 V voltage-driven (equipped with integrated pre-resistor) cable length: 0,3 m diameter: 94 mm
	ZVI-FLDL-i86x15-W Article no.: 11197768	flashable LED bar light white diffuse 24 V voltage-driven (equipped with integrated pre-resistor) cable length: 0,3 m dimensions: 18 mm × 95 mm × 20 mm housing