2. Product Overview
  3. Rotary encoders / angle sensors
  4. HeavyDuty speed / position switches
  5. Mechanical speed switches
  6. TDP 0,09 + FSL
Technical data
Technical data - electrical ratings
Interference immunity
  • EN 61000-6-2
Emitted interference
  • EN 61000-6-3
Approval
  • CE
Technical data - electrical ratings (centrifugal switch)
Range of switching speed (ns)
  • 850...4500 rpm (Δn = 2 rpm/s)
Switching accuracy
  • ± 4 % (Δn = 2 rpm/s);
  • 20 % (Δn = 1500 rpm/s)
Switching deviation
  • ≤3 % (cw-ccw rotation)
Switching hysteresis
  • 40 % of switching speed
Switching outputs
  • 1 output, speed control
Output switching capacity
  • ≤6 A / 230 VAC
  • ≤1 A / 125 VDC
  • (EAC: <50 VAC / 75 VDC)
Minimum switching current
  • 50 mA
Technical data - electrical ratings (tachogenerator)
Reversal tolerance
  • ≤0.1 %
Linearity tolerance
  • ≤0.15 %
Temperature coefficient
  • ± 0.05 %/K (open-circuit)
Isolation class
  • B
Calibration tolerance
  • ±3 %
Climatic test
  • Humid heat, constant (IEC 60068-2-3, Ca)
Performance
  • 1.2 W (speed ≥3000 rpm)
Armature-circuit time-constant
  • <25 µs
Open-circuit voltage
  • 10...60 mV per rpm
Technical data - mechanical design
Size (flange)
  • ø85 mm
Shaft type
  • ø6 mm solid shaft
Admitted shaft load
  • ≤40 N axial
  • ≤60 N radial
Protection EN 60529
  • IP 56
Speed (n)
  • ≤1.25 · ns
Range of switching speed (ns)
  • 850...4500 rpm (Δn = 2 rpm/s)
Torque
  • 1 Ncm
Rotor moment of inertia
  • 0.5 kgcm²
Material
  • Housing: aluminium die-cast
  • Shaft: stainless steel
Operating temperature
  • -30...+130 °C
Resistance
  • IEC 60068-2-6
  • Vibration 5 g, 10-2000 Hz
  • IEC 60068-2-27
  • Shock 150 g, 1 ms
Connection
  • 2x terminal box
Weight approx.
  • 1.6 kg
Downloads
Data sheet
Operating Manual
Declaration of conformity

Accessories
Mounting accessories
The selected altAttribute does not exist! Spring disk coupling K 35 (shaft ø6...12 mm)
  • High quality torsionally stiff and backlash free coupling
  • Compensating of mounting errors
  • Balanced torsional rigidity (torsional spring constant)
  • Protection against shaft currents with an insulated hub on non-drive end (ø11 H7)
  • Additional key possible
To the top