VCXG.2-57C

Article no.: 11708165

2464 × 2048 px
Sony IMX548
1/1.8" CMOS
25 fps
Gigabit Ethernet

available on request

Technical data

show all

Sensor information

Sensor

Sony IMX548 Gen4

Mono/Color

Color

Sensor type

1/1.8″ CMOS

Shutter type

Global shutter

Resolution

2464 × 2048 px

Pixel size

2.74 × 2.74 µm

Exposure time

0.001 … 60000 ms

Data quality (EMVA 1288 typical)

Dark noise

2.47 e-

Saturation capacity

9303 e-

Dynamic range

69.5 dB

Signal-to-noise ratio

39.7 dB

Quantum efficiency

43.9 % @ 465 nm
50.9 % @ 536 nm
40.2 % @ 630 nm

Acquisition formats

Image formats, interface frame rate max.

Full Frame, 2464 × 2048 px, max. 25 fps
Binning 2×2, 1232 × 1024 px, max. 75 fps
Binning 2×1, 1232 × 2048 px, max. 25 fps
Binning 1×2, 2464 × 1024 px, max. 75 fps

Image formats, aquisition frame rate max. (Burst Mode)

Full Frame, 2464 × 2048 px, max. 25 fps

Pixel formats

BayerRG8
BayerRG10
BayerRG12
BayerRG12 Packed
Mono8
Mono10
Mono12
Mono12 Packed
RGB8
BGR8

Image preprocessing

Analog controls

Gain (0 … 8 dB)
Offset (0 … 63 LSB 10 Bit)

Color models

Mono
Raw Bayer
RGB
BGR

Color processing

Integrated color processor for high quality color calculation

Camera features

Basic Functions

Exposure
Gain / Color Gain
Trigger / Exposure Active (Flash)
Binning 2x2
Partial Scan
Offset
Free Running Mode (Live Image)

Auto Functions

Exposure Auto
Gain Auto
White Balance Auto
Color Transformation Auto

Image Pre-processing

Image Flipping (X/Y)
Color Processing (RGB, BGR, Mono)
Color Enhancement (with optimized ColorTransformationMatrix)
LUT / Gamma

Acquisition / Interface

Burst Mode
Adjustable Framerate
Device Link Throughput Limit
Internal Image Buffer

Synchronization

free running
trigger

Trigger sources

Hardware
Software
ActionCommand

Trigger delay

0 … 2 s, tracking and buffering of up to 256 trigger signals

Process Synchronization

Events
Timer
Trigger Delay
Debouncer
Counter
Sequencer
Trigger via Action CMD (GigE)
Additional Output Modes (e.g. Trigger Ready)
Chunk data inside transferred image
Encoder support via Counter End trigger source

Additional Functions

User Set
Integrated temperature sensor
Readable additional information (e.g. sensor information)

Calibration data

Integrated color correction matrix (3000 K, 5000 K, 6500 K, 9500 K, and user defined)
Camera calibration data (user defined storage for intrinsic / extrinsic camera parameters, and geometry distortion values)
Customer data storage (128 bytes user defined)

Internal image buffer

185 MB
8 image (Trigger Mode)
1 image (Free Running Mode)

Interfaces and connectors

Data interface

Gigabit Ethernet, Transfer rate 1000 Mbits/sec, Fast Ethernet, Transfer Rate 100 Mbits/sec, Connector: 8P8C Modular Jack (RJ45), screwable TYPE090 (according to GigE Vision Mechanical Supplement)

Process interface

M8 / 8 pins (SACC-DSI-M8MS-8CON-M8-L180)

Power supply

via M8/8 pins or Power over Ethernet (PoE)

Mechanical data

Lens mount

C-mount

Width

29 mm

Height

29 mm

Depth

49 mm

Weight

≤ 120 g

Material

zinc die casting, baked varnish

Electrical data

Voltage supply range +Vs

12 … 24 V DC (external power supply)
36 … 57 V DC (Power over Ethernet)

Power consumption

Approx. 2.7 W @ 12 VDC and 25 fps
Approx. 3.3 W @ 48 VDC (PoE) and 25 fps

Non-volatile memory

Flash memory size

128 kB

Environmental conditions

Operating temperature

0 … +65 ° @ T = measurement point

Storage temperature

-20 … +70 °C

Humidity

10 … 90 % (non-condensing)

Protection class

IP 40 (with mounted lens and cable)

Digital I/Os

Lines

1 input line
1 output line
2 general purpose lines

Output line sources

Off
Exposure Active
Timer1
Readout Active
User0
User1
User2
TriggerReady

Conformity

Conformity

CE
RoHS
UL recognized

Software

show all

Software packages

Baumer neoAPI (Windows, Linux, Linux ARM)
- Link
Baumer Camera Explorer (Windows, Linux, Linux ARM)
- Link
Baumer GAPI SDK v2.x (Windows, Linux, Linux ARM)
- Link
Baumer GAPI software examples
- Link
Baumer IPConfig Tool v2.0.2 (Windows)
- Download
Third Party Software
- Link

Downloads

show all

Data sheet

Data sheet – VCXG.2-57C
- DE (pdf | 875 KB)
Data sheet – VCXG.2-57C
- EN (pdf | 874 KB)
Detailed data sheet – VCXG.2-57C
- EN (pdf | 524 KB)

Quickstart

Quick Start Guide VCXG.2
- EN/DE/FR (pdf | 476 KB)

Operating Manual

User’s Guide VCXG.2 / VCXG.2.XC / VCXG.2.I / VCXU.2
- DE (pdf | 12 MB)
- EN (pdf | 12 MB)

Certificates / approvals

CE certification
- EN/DE/BG/CZ/DK/ES/FI/FR/GR/HU/IT/LT/LV/NL/NO/PL/PT/RO/SK/SI (pdf | 292 KB)
UL certification
- EN (pdf | 506 KB)

Additional information

EMVA 1288 Summary Sheet
- EN (pdf | 327 KB)
Compliant list for Baumer industrial cameras (GigE)
- EN (pdf | 882 KB)

Application notes

Application Notes
- Link

CAD

VCXG.2-57C / STEP
- (zip | 409 KB)

Tools

Lens selector
- Link
Frame Rate Calculator
- Link

EPLAN

Link to dataportal
- Link to Data Portal

Drawings

show all

Dimension drawing

The selected altAttribute does not exist!

(png | 98 KB)

Accessories

show all

Power supply

Z-Power Supply Kit LX PX VCXG int.

Article no.: 11122415

universal power supply 12V/2,0A international with adapters for EU, US, UK, AU, KR
power supply and process interface adapter cable for LX, PX and VCXG cameras, length 5,0 m

Starter Kit

VCXG Starter Kit

Article no.: 11165158

GigE PCIe interface board
GigE cable 3,0 m
power supply kit for LX and VCXG cameras
Mounting Adapter Type E
Software (WINDOWS, LINUX, LINUX ARM) via Download
camera not included

PCIe/Adapter

	PCIe Ethernet Server Adapter I210 Article no.: 11137188	Gigabit Ethernet network adapter PCIe x1 (single lane) server adapter single GigE port supports screw lock connectors
	ZVA-Intel_Eth_Serv Adaptr_I350-T2V2 Article no.: 11168452	Gigabit Ethernet network adapter PCIe x2 (dual lane) server adapter single GigE port
	ZVA-PCIe-1672E-AE Article no.: 11168453	Gigabit Ethernet interface board PCIe x4 (quad lane) Dual GigE port Note: 4 lane PCI Express connector required

Housing accessories

	Housing base set B V4A VCXG.I r IP69K Article no.: 11207844	Stainless steel housing base set for Pharma and Food & Beverage applications (incl. Splash and food zones) Hygienic design (design according to EHEDG guidelines) to house VCXG.I cameras, IP69K protection Housing corpus with clamp elements to position the chosen VCXG.I camera M40 hygienic gland and M40 stainless steel counter nut to for fixation at the machine wall sealed up cable gland for IP68 protection inside the machine To be ordered separately: stainless steel lens protection Tube M60 V4A IP69K (11208732) necessary to close the housing
	Clamp Elements CX 29 x 29 mm V4A IP69K Article no.: 11217114	Clamp elements to insert standard CX series cameras (VCXG and VCXU) into the “Housing base set B V4A VCXG.I r IP69K” (11207844)
	Housing V4A IP69K Mounting Tool Article no.: 11208719	Mounting tool to seal the stainless steel V4A VCXG.I r IP69K housing system
	Tube M60 V4A IP69K Acryl Article no.: 11208732	stainless steel lens protection with PMMA cover glass (FDA certified) suitable for Housing base set B V4A VCXG.I r IP69K (11208744) thread: M60 length 31 mm
	Cover Glass Replacement Acryl 2" Article no.: 11217113	Replacement cover glass for exchange in "Tube M60 V4A IP69K Acryl" (11208732) PMMA material FDA certified
	Sealing ReplacementSet Housing V4A IP69K Article no.: 11217115	Complete sealing replacement set to exchange all sealings of the stainless steel V4A VCXG.I r IP69K housing system using the "Tube M60 V4A IP69K Acryl" incl. Flouroprene XP41 sealings, TPU sealing, EPDM O-rings (inside only)
	Rotation lock M40 VA4 IP69K Article no.: 11208731	Rotation lock for Housing base set B V4A VCXG.I r IP69K (11208744) with clamping part for safe position locking

Lens accessories

	Filter CL/27 (R2) ROT PENTAX Article no.: 11006551	Ricoh color filter (red)
	Filter Pol PENTAX PL27 Article no.: 11092000	Ricoh polarization filter linear filter thread
	ZVI-FILTER POL. PL30.5 C91353 Article no.: 11175428	Ricoh polarization filter linear filter thread M30.5
	ZVI-Filter Pol. PL40.5 C91301 Article no.: 11167713	Ricoh polarization filter linear filter thread M40.5
	ZVL-Adapter S-Mount / C-Mount Article no.: 11167984	Adapter S-mount / C-mount
	ZVF-Filter Holder Mounting Tool Article no.: 11177601	Mounting tool to screw in filter holders
	Close-up ring set ZVS-FP-RGST six-piece Article no.: 11010529	Close-up ring set ZVS-FP-RGST six-piece 0,5, 1, 5, 10, 20, 40 mm
	ZVK-Sealing Pack 3.05*13.71mm Article no.: 11177213	5 sealings for VCX cameras with Sony IMX253, IMX304, IMX255 and IMX267 sensors to install instead of the filter in color models The exchange causes a modification of the optical distance and makes the focal flange distance shorter. Please check the suitability of the chosen lens.

Lens

	Obj Kowa LM12XC 12mm/f2,0 Article no.: 11092574	Kowa lens 12 mm F 2,0-22 format 4/3" M.O.D. 0,1 m C-mount
	Obj Kowa LM16XC 16mm/f2,0 Article no.: 11092592	Kowa lens 16 mm F 2,0-22 format 4/3" M.O.D. 0,1 m C-mount
	Obj Kowa LM25XC 25mm/f2,0 Article no.: 11092593	Kowa lens 25 mm F 2,0-16 format 4/3" M.O.D. 0,15 m C-mount
	Obj Kowa LM35XC 35mm/f2,0 Article no.: 11092597	Kowa lens 35 mm F 2,0-22 format 4/3" M.O.D. 0,2 m C-mount
	Obj Kowa LM50XC 50mm/f2.0 Article no.: 11166201	Kowa lens 50 mm F 2,0-22 format 4/3" M.O.D. 0,3 m C-mount
	ZVL-Dimension_2.8/8_C Article no.: 11214035	Carl Zeiss lens 8 mm F 2,8-22 format 4/3'' M.O.D. 0,102 m locating screw for aperture and focus C-mount
	ZVL-Dimension_2/12_C Article no.: 11214036	Carl Zeiss lens 12 mm F 2,0-22 format 4/3'' M.O.D. 0,101 m locating screw for aperture and focus C-mount
	ZVL-Dimension_2/18_C Article no.: 11214038	Carl Zeiss lens 18 mm F 2,0-22 format 4/3'' M.O.D. 0,090 m locating screw for aperture and focus C-mount
	ZVL-Dimension_2/25_C Article no.: 11214039	Carl Zeiss lens 25 mm F 2,0-22 format 4/3'' M.O.D. 0,152 m locating screw for aperture and focus C-mount
	ZVL-Dimension_2/35_C Article no.: 11214040	Carl Zeiss lens 35 mm F 2,0-22 format 4/3'' M.O.D. 0,209 m locating screw for aperture and focus C-mount
	ZVL-Dimension_2/50_C Article no.: 11214041	Carl Zeiss lens 50 mm F 2,0-22 format 4/3'' M.O.D. 0,311 m locating screw for aperture and focus C-mount

Network components

GigE Power Switch

Article no.: 11008795

GigE switch
PoE and Jumbo Frame support
4x 1000base-T
DIN rail mounting
operating voltage: 24-48 V; PoE requires 48 V

Cable

	Cable GigE RJ45/RJ45, 3,0 m Article no.: 10170048	Gigabit Ethernet interface cable CAT7 length 3,0 m
	Cable GigE RJ45/RJ45, 6,0 m Article no.: 10141719	Gigabit Ethernet interface cable CAT7 length 6,0 m
	Kabel GigE RJ45s/RJ45, 5,0 m, chain Article no.: 11150185	Gigabit Ethernet interface cable CAT6 RJ45 (screw lock) to RJ45 cable carrier compatible length 5,0 m
	Kabel GigE RJ45s/RJ45, 10,0 m, chain Article no.: 11150302	Gigabit Ethernet interface cable CAT6 RJ45 (screw lock) to RJ45 cable carrier compatible length 10,0 m
	Kabel GigE RJ45s/RJ45, 15,0 m, chain Article no.: 11150186	Gigabit Ethernet interface cable CAT6 RJ45 (screw lock) to RJ45 cable carrier compatible length 15,0 m
	Kabel GigE RJ45s/RJ45, 20,0 m, chain Article no.: 11150188	Gigabit Ethernet interface cable CAT6 RJ45 (screw lock) to RJ45 cable carrier compatible length 20,0 m
	Cable GigE RJ45s/RJ45, 10,0 m, flex v2 Article no.: 11173256	Gigabit Ethernet interface cable CAT5e RJ45 (screw lock) to RJ45 suitable for cable carrier and torsion applications length 10,0 m
	Cable GigE RJ45s/RJ45, 20,0 m, flex v2 Article no.: 11173257	Gigabit Ethernet interface cable CAT5e RJ45 (screw lock) to RJ45 suitable for cable carrier and torsion applications length 20,0 m
	Cable GigE RJ45s/RJ45, 30,0 m, flex v2 Article no.: 11173258	Gigabit Ethernet interface cable CAT5e RJ45 (screw lock) to RJ45 suitable for cable carrier and torsion applications length 30,0 m
	Adapter Cable TX to VCXG VCXU Adapter Cable Article no.: 11701127	Adapter to connect VCXG and VCXU cameras to existing TXG cabling Split cable M8/8-pin female connector to 1x M8/3-pin male connector (power) and 1x M8/4-pin male connector (I/Os) Protection class IP65/IP67 Length 0.4 m
	Z-ESG 32FP0500G Shielded cable 8 wires, female connector, 5,0 m Article no.: 11118810	shielded process interface cable M8/8-pin female connector to open wires cable carrier compatible length 5,0 m
	Z-ESW 31FH0500 90° Cable 8 wires, 5,0 m Article no.: 11105262	process interface cable 90° angled M8/8-pin female connector to open wires length 5,0 m alternative article: CAM8.A8-11232605

Mountings and heat sinks

	Mounting Adapter Type D (Front) Article no.: 11165176	mounting adapter for VCXU, VCXG and VCXG.I cameras incl. screw (hexagon socket) stable front side mounting
	Mounting Adapter Type E Article no.: 11165173	camera mounting for cameras of the CX and EX series incl. screws (hexagon socket) stable bottom and tripod mounting
	Heat Sink Type C Article no.: 11165171	heat sink for cameras of the CX and EX series incl. screws (hexagon socket) 50 mm x 64 mm x 20 mm
	Adapter CX- / TX-Mount Article no.: 11165175	mounting adapter for cameras of the CX and EX series to reach mounting dimensions of TX cameras incl. screws (hexagon socket)
	Mounting Adapter Type H Article no.: 11191852	camera mounting adapter for cameras of the CX, LX and QX series incl. screw (hexagon socket) rotatable mounting

Illumination

	FFPR-i100-W Article no.: 11086540	flashable LED dark field illumination white diffuse 24 V voltage-driven (equipped with integrated pre-resistor) cable length: 0,3 m diameter: 100 mm
	FLDL-i150x15-W Article no.: 11086539	flashable LED bar light white diffuse 24 V voltage-driven (equipped with integrated pre-resistor) cable length: 1 m dimensions: 158 mm × 17 mm × 20 mm housing
	FLDL-TP-Si200x100-W Article no.: 11086537	flashable LED back light white diffuse 24 V voltage-driven (equipped with integrated pre-resistor) cable length: 1 m dimensions: 116 mm × 228 mm × 23,5 mm housing
	FLDL-TP-Si36-W Article no.: 11086536	flashable LED back light white diffuse 24 V voltage-driven (equipped with integrated pre-resistor) cable length: 1 m dimensions: 47 mm × 47 mm × 15 mm housing
	FLDL-TP-Si85x77-W Article no.: 11086538	flashable LED back light white diffuse 24 V voltage-driven (equipped with integrated pre-resistor) cable length: 1 m dimensions: 95 mm × 95 mm × 15 mm housing
	FLDM-i100-W Article no.: 11086541	flashable LED dome light white 24 V voltage-driven (equipped with integrated pre-resistor) cable length: 0,3 m diameter: 130 mm
	FLDR-i90B-IR24 Article no.: 11090900	flashable LED ring light IR 875 nm 24 V voltage-driven (equipped with integrated pre-resistor) cable length: 0,3 m diameter: 94 mm
	FLDR-i90B-SR24 Article no.: 11154321	flashable LED ring light red (626 nm) 24 V voltage-driven (equipped with integrated pre-resistor) cable length: 0,3 m diameter: 94 mm
	FLDR-i90B-W Article no.: 11085869	flashable LED ring light white 24 V voltage-driven (equipped with integrated pre-resistor) cable length: 0,3 m diameter: 94 mm
	FLFL-Si60-IR24 Article no.: 11095910	flashable LED back light NIR diffuse 24 V voltage-driven (equipped with integrated pre-resistor) cable length: 1 m dimensions: 94 mm × 94 mm × 10 mm housing
	ZVI-FLDL-i86x15-W Article no.: 11197768	flashable LED bar light white diffuse 24 V voltage-driven (equipped with integrated pre-resistor) cable length: 0,3 m dimensions: 18 mm × 95 mm × 20 mm housing
	ZVI-LED Spot5WFL-B/SPS-220 Article no.: 11175036	LED spot light blue 19… 30 V cable length: 0,15 m diameter: 34 mm adjustable glass optics for spot or broad light integrated flash controller and potentiometer (brightness and exposure time) direct connection to M12/12-pin connector thanks to T-adapter cable (ZVI-LUMIMAX T1-Adapter cable illumination (11175008)) maximum exposure time 220 µs (maximum frequency 35 Hz)
	ZVI-LED Spot5WFL-IR850/SPS-220 Article no.: 11175035	LED spot light infrared 19… 30 V cable length: 0,15 m diameter: 34 mm adjustable glass optics for spot or broad light integrated flash controller and potentiometer (brightness and exposure time) direct connection to M12/12-pin connector thanks to T-adapter cable (ZVI-LUMIMAX T1-Adapter cable illumination (11175008)) maximum exposure time 220 µs (maximum frequency 35 Hz)
	ZVI-LED Spot5WFL-R/SPS-220 Article no.: 11175034	LED spot light red 19… 30 V cable length: 0,15 m diameter: 34 mm adjustable glass optics for spot or broad light integrated flash controller and potentiometer (brightness and exposure time) direct connection to M12/12-pin connector thanks to T-adapter cable (ZVI-LUMIMAX T1-adapter cable (11175008)) maximum exposure time 220 µs (maximum frequency 35 Hz)
	ZVI-LED Spot5WFL-W/SPS-220 Article no.: 11175031	LED spot light white 19… 30 V cable length: 0,15 m diameter: 34 mm adjustable glass optics for spot or broad light integrated flash controller and potentiometer (brightness and exposure time) direct connection to M12/12-pin connector thanks to T-adapter cable (ZVI-LUMIMAX T1-adapter cable illumination (11175008)) maximum exposure time 220 µs (maximum frequency 35 Hz)
	ZVI-ARCUSM_24VDC_WEIß_120° ARCUS-M white 24VDC with M8 connector Article no.: 11130183	flashable LED dark field illumination white radiation angle 120° 24 V voltage-driven (equipped with integrated pre-resistor) M8/4-pin connector (cable has to be ordered separately) diameter: 120 mm
	ZVI-HILIGHT120_24VDC_WEIß HI-LIGHT-120 white 24VDC with M8 connector Article no.: 11130182	flashable LED back light white diffuse radiation angle 120° diameter: 94 mm 24 V voltage-driven (equipped with integrated pre-resistor) M8/4-pin connector (cable has to be ordered separately) dimensions: 127 mm × 127 mm × 20 mm housing
	ZVI-HILIGHT80_24VDC_WEIß HI-LIGHT-80 white 24VDC with M8 connector Article no.: 11130181	flashable LED back light white diffuse radiation angle 80° diameter: 94 mm 24 V voltage-driven (equipped with integrated pre-resistor) M8/4-pin connector dimensions: 87 mm × 87 mm × 20 mm housing
	ZVI-LOGO2_24VDC_ROT617NM_30° LOGO-2 red 617nm 30° 24VDC with M8 connector Article no.: 11130184	flashable LED bar light red (617 nm) radiation angle 30° 24 V voltage-driven (equipped with integrated pre-resistor) M8/4-pin connector (cable has to be ordered separately) dimensions: 74 mm × 15 mm × 17 mm housing
	ZVI-HELIOS-130_IP65_weiß_80°_24VDC_M8 HELIOS-130 IP65 white 80° 24VDC with M8 connector Article no.: 11701627	flashable LED ring light white radiation angle 80° 24 V voltage-driven (equipped with integrated pre-resistor) M8/4-pin connector (cable has to be ordered separately) diameter: 134 mm IP65 protection
	ZVI-RONDOLX_24VDC_IR850NM_120° RONDO-LX IR 850nm 120° 24VDC with M8 connector Article no.: 11130150	flashable LED ring light infrared (850 nm) radiation angle 120° 24 V voltage-driven (equipped with integrated pre-resistor) M8/4-pin connector (cable has to be ordered separately) diameter: 101 mm
	ZVI-RONDOLX_24VDC_IR850NM_50° RONDO-LX IR 850nm 50° 24VDC with M8 connector Article no.: 11130176	flashable LED ring light infrared (850 nm) radiation angle 50° 24 V voltage-driven (equipped with integrated pre-resistor) M8/4-pin connector (cable has to be ordered separately) diameter: 101 mm
	ZVI-RONDOLX_24VDC_WEIß_120° RONDO-LX white 120° 24VDC with M8 connector Article no.: 11130179	flashable LED ring light white radiation angle 120° 24 V voltage-driven (equipped with integrated pre-resistor) M8/4-pin connector (cable has to be ordered separately) diameter: 101 mm
	ZVI-TOPLIGHT80_24VDC_rot617nm_30° TOPLIGHT80 red 617nm 30° 24VDC Article no.: 11135012	flashable LED incident light red (617 nm) radiation angle 30° 24 V voltage-driven (equipped with integrated pre-resistor) M8/4-pin connector (cable has to be ordered separately) dimensions: 87 mm × 87 mm × 20 mm housing
	ZVI-TOPLINED1_24VDC_ROT617NM_30° TOP-LINE-D1 red 617nm 30° 24VDC M8 1-canal Article no.: 11130187	flashable LED bar light red (617 nm) radiation angle 30° 24 V voltage-driven (equipped with integrated pre-resistor) M8/4-pin connector (cable has to be ordered separately) dimensions: 78 mm × 25 mm × 23 mm housing
	ZVI-TOPLINED1_24VDC_SHWEIß_120° TOP-LINE-D1 SH white 120° 24VDC M8 1-canal Article no.: 11130186	flashable LED bar light SH white radiation angle 120° 24 V voltage-driven (equipped with integrated pre-resistor) M8/4-pin connector (cable has to be ordered separately) dimensions: 78 mm × 25 mm × 23 mm housing
	ZVI-TOPLINED1_24VDC_WEIß_120° TOP-LINE-D1 white 120° 24VDC M8 1-canal Article no.: 11130185	flashable LED bar light white radiation angle 120° 24 V voltage-driven (equipped with integrated pre-resistor) M8/4-pin connector (cable has to be ordered separately) dimensions: 78 mm × 25 mm × 23 mm housing
	Baumer ZVI-RL-80/141-IR Article no.: 11731493	Flashable infrared LED ring light Infrared (850 nm) Radiation angle 90° Integrated LED controller with 4 operating modes IP54
	Baumer ZVI-RL-80/141-R Article no.: 11731494	Flashable red LED ring light Red (625 nm) Radiation angle 90° Integrated LED controller with 4 operating modes IP54
	Baumer ZVI-RL-80/141-W Article no.: 11731496	Flashable white LED ring light 5000 K, CRI80 Radiation angle 90° Integrated LED controller with 4 operating modes IP54
	Baumer ZVI-BL-310/54-R Article no.: 11731511	Flashable red LED bar light Red (625 nm) Radiation angle 100° Integrated LED controller with 4 operating modes IP54
	Baumer ZVI-BL-310/54-W Article no.: 11731512	Flashable white LED bar light 5000 K, CRI80 Radiation angle 100° Integrated LED controller with 4 operating modes IP54