optoPulse EN580E.IL-SC10.GB1T2.01024.K

Article no.: 11246032

Size ø58 mm
Precise optical sensing
Output signal level TTL
Pulses per revolution 1024
Connection: flange connector M23, 12-pin, CCW

4 pieces immediately available from stock

Technical data

show all

Technical data - electrical ratings

Voltage supply

5 VDC ±5 %

Reverse polarity protection

Short-circuit proof

Yes (max. 1 s and 1 signal)

Consumption w/o load

≤70 mA

Pulses per revolution

1024

Phase shift

90 ° ±10°

Duty cycle

40…60 %

Reference signal

Zero pulse, width 90° ±10 %

Sensing method

Optical

Output frequency

≤300 kHz (TTL)

Output signals

A+, B+, R+, A-, B-, R-

Output stages

TTL/RS422

Interference immunity

EN 61000-6-2

Emitted interference

EN 61000-6-4

Approval

UL-Listing: E217823

Technical data - mechanical design

Size (flange)

ø58 mm

Shaft type

ø10 x 20 mm, solid shaft with flat

Admitted shaft load

≤40 N axial
≤80 N radial

Flange

Clamping flange

Protection EN 60529

IP 54 (flange side)
IP 65 (housing side)

Operating speed

≤6000 rpm (+25 °C)

Starting torque

≤0.02 Nm

Material

Housing: aluminium
Solid shaft: stainless steel

Operating temperature

-25...+100 °C (see general information)

Relative humidity

95 % non-condensing

Resistance

EN 60068-2-6 Vibration 30 g, 10-2000 Hz
EN 60068-2-27 Shock 100 g, 11 ms

Connection

Flange connector M23, 12-pin, CCW

Weight approx.

300 g

Downloads

show all

Data sheet

Data sheet – EN580E.IL-SC10.GB1T2.01024.K
- FR (pdf | 909 KB)
Data sheet – EN580E.IL-SC10.GB1T2.01024.K
- DE (pdf | 912 KB)
Data sheet – EN580E.IL-SC10.GB1T2.01024.K
- EN (pdf | 909 KB)

Quickstart

EN580E.IL
- DE/EN/FR (pdf | 2 MB)

Certificates / approvals

UL-Listing: E217823
- (pdf | 263 KB)

CAD

EN580E.IL - solid shaft with clamping flange, flange connector M23
- (zip | 384 KB)

EPLAN

Link to dataportal
- Link to Data Portal

Accessories

show all

Mounting accessories

	Double loops coupling (D1=10 / D2=10) For encoder with solid shaft Article no.: 11101781	Thermally and electrically isolated Absorbing shocks and vibration Excellent compensation of radial, lateral and angular misalignments Medium torsional stiffness Low restoring forces Maintenance-free
	Bellows coupling (D1=06 / D2=10) For encoder with solid shaft Article no.: 11050507	Backlash-free angle-synchronous transmission Optimum compensation of misalignments Very high torsional spring stiffness Small restoring force Vibration damping Stainless steel bellows
	Coupling CPS25 (L=19, D1=10 / D2=10) For encoder with solid shaft Article no.: 11065923	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Coupling CPS25 (L=19, D1=10 / D2=06) For encoder with solid shaft Article no.: 11065922	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Spring washer coupling (D1=6 / D2=10) For encoder with solid shaft Article no.: 10141132	Backlash-free and angle-synchronous transmission of rotary movements Plug-in version Electric isolated Suitable for very high speeds Good compensation of all misalignments
	Spring washer coupling (D1=10 / D2=10) For encoder with solid shaft Article no.: 10141133	Backlash-free and angle-synchronous transmission of rotary movements Plug-in version Electric isolated Suitable for very high speeds Good compensation of all misalignments
	Coupling CPS37 (L=24, D1=10 / D2=06) For encoder with solid shaft Article no.: 11069337	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Coupling CPS37 (L=24, D1=10 / D2=10) For encoder with solid shaft Article no.: 11069340	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Bellows coupling (D1=10 / D2=10) For encoder with solid shaft Article no.: 11053277	Backlash-free angle-synchronous transmission Optimum compensation of misalignments Very high torsional spring stiffness Small restoring force Vibration damping Stainless steel bellows
	Spring encoder arm Article no.: 11101893	Tether arm for Ø58 mm with clamping flange Optimal for use encoders with measuring wheel Virtually any contact pressure adjustable Versatile mounting options
	Mounting adaptor For encoders with clamping flange Article no.: 10125051	Glass-fiber reinforced plastic Excellent resistance against temperature and chemicals Electrically isolated encoder mount

Cables with open-ended wires

	Female connector M23, 12-pin, CW, with cable 1 m Article no.: 11095302	Connection cable shielded with female connector M23, open cable end Cable [4x2x0.14 mm²], cable length 1 m Cable coating PVC Colour code according to DIN 47100 UL/CSA approval Connector M23: 12-pin, female, clockwise (CW). Suitable for cable connection to flange connector M23 (12-pin, male, counter-clockwise (CCW)). Temperature range -40...+85 °C (fixed installation)
	Female connector M23, 12-pin, CW, with cable 2 m Article no.: 11100408	Connection cable shielded with female connector M23, open cable end Cable [4x2x0.14 mm²], cable length 2 m Cable coating PVC Colour code according to DIN 47100 UL/CSA approval Connector M23: 12-pin, female, clockwise (CW). Suitable for cable connection to flange connector M23 (12-pin, male, counter-clockwise (CCW)). Temperature range -40...+85 °C (fixed installation)
	Female connector M23, 12-pin, CW, with cable 5 m Article no.: 11100430	Connection cable shielded with female connector M23, open cable end Cable [4x2x0.14 mm²], cable length 5 m Cable coating PVC Colour code according to DIN 47100 UL/CSA approval Connector M23: 12-pin, female, clockwise (CW). Suitable for cable connection to flange connector M23 (12-pin, male, counter-clockwise (CCW)). Temperature range -40...+85 °C (fixed installation)
	Female connector M23, 12-pin, CW, with cable 10 m Article no.: 11100431	Connection cable shielded with female connector M23, open cable end Cable [4x2x0.14 mm²], cable length 10 m Cable coating PVC Colour code according to DIN 47100 UL/CSA approval Connector M23: 12-pin, female, clockwise (CW). Suitable for cable connection to flange connector M23 (12-pin, male, counter-clockwise (CCW)). Temperature range -40...+85 °C (fixed installation)
	Connector M23 (S2BG12), 1 m cable (incremental) Article no.: 11072792	Shielded connection cable with M23-female connector (12-pin) and wire end sleeves for incremental encoders with sensor outputs
	Connector M23 (S2BG12), 2 m cable (incremental) Article no.: 11072796	Shielded connection cable with M23-female connector (12-pin) and wire end sleeves for incremental encoders with sensor outputs
	Connector M23 (S2BG12), 5 m cable (incremental) Article no.: 11072804	Shielded connection cable with M23-female connector (12-pin) and wire end sleeves for incremental encoders with sensor outputs
	Connector M23 (S2BG12), 10 m cable (incremental) Article no.: 11072815	Shielded connection cable with M23-female connector (12-pin) and wire end sleeves for incremental encoders with sensor outputs

Measuring wheels

	MR752.10A Small measuring wheel Article no.: 11011440	Circumference 30.48 cm Surface profile: Smooth Surface material: Polyurethan Bore ø10 mm
	MR241.10D Small measuring wheel Article no.: 11033281	Circumference 20 cm Surface profile: Smooth Surface material: Hytrel TPE-E Bore ø10 mm
	MR261.10A Small measuring wheel Article no.: 11033290	Circumference 20 cm Surface profile: Knopped rubber Surface material: Nitrile NBR Bore ø10 mm
	MR291.10D Small measuring wheel Article no.: 11033300	Circumference 20 cm Surface profile: Knurled Surface material: Hytrel TPE-E Bore ø10 mm
	MR512.10A Large measuring wheel Article no.: 11033308	Circumference 50 cm Surface profile: Cross-knurled Surface material: Aluminium Bore ø10 mm
	MR552.10A Large measuring wheel Article no.: 11033323	Circumference 50 cm Surface profile: Smooth Surface material: Polyurethan Bore ø10 mm
	MR562.10A Large measuring wheel Article no.: 11033329	Circumference 50 cm Surface profile: Knopped rubber Surface material: Nitrile NBR Bore ø10 mm
	MR542.10D Large measuring wheel Article no.: 11038480	Circumference 50 cm Surface profile: Smooth Surface material: Hytrel TPE-E Bore ø10 mm
	MR592.10D Large measuring wheel Article no.: 11038481	Circumference 50 cm Surface profile: Knurled Surface material: Hytrel TPE-E Bore ø10 mm