O200.SP-GW1J.72CV

Article no.: 11210554

SmartReflect - Safe barrier principle without reflector
Baumer PinPoint LED: Small, homogeneous light spot with sharp edges
Manipulation-proof, simple teach-in via qTeach or line teach
IO-Link for extended parameterization options and additional diagnostic data
Robust housing with stainless steel spacer sleeves

> 10 pieces immediately available from stock

Technical data

show all

General data

Type

Light barrier

Version

Standard object detection

Background position Sde

25 … 180 mm

Scanning range Sa

90% ... 85% Sde

Smallest object recognizable typ.

2.5 mm

Power on indication

LED green

Alignment / soiled lens indicator

Flashing output indicator

Output indicator

LED yellow

Sensing distance adjustment

Teach-in and IO-Link

Suppression of reciprocal influence

Alignment optical axis

< 1,5°

Light Source

Light source

Pulsed PinPoint LED

Wave length

644 nm

Electrical data

Response time / release time

< 0.25 ms (High Speed Mode)

Voltage supply range +Vs

10 … 30 VDC

Current consumption max. (no load)

40 mA (@ 10 VDC)

Current consumption typ.

16 mA (@ 24 VDC)

Voltage drop Vd

<2 VDC

Output function

Light / dark operate

Output circuit

Push-pull

Output current

50 mA

Short circuit protection

Reverse polarity protection

Communication interface

Interface

IO-Link V1.1

IO-Link port type

Class A

Baud rate

230.4 kBaud (COM 3)

Cycle time

≥ 0.6 ms

Process data length

32 Bit

Process data structure

Bit 0 = SSC1 (presence)
Bit 2 = quality
Bit 3 = alarm
Bit 5 = SSC4 (counter)
Bit 16-31 = 16 Bit measurement

Adjustable parameters

Switching point
Time filters
LED status indicators
Output logic
Counter
Operation mode
Deactivate the sensor element
Find Me function
Teach-in mode

Additional data

Excess gain
Operating cycles
Device temperature

Mechanical data

Width / diameter

8 mm

Height / length

25.1 mm

Depth

15.8 mm

Design

Rectangular

Mechanical mounting

Sleeve smooth (stainless steel)

Housing material

Plastic (ASA, PMMA)

Front (optics)

PMMA

Connection types

Cable 4 pin, 2 m

Cable characteristics

PVC / PVC 4 x 0.08 mm²

Ambient conditions

Protection class

IP 67

Operating temperature

-25 … +50 °C

3D-Model

show all

3D-Model

Generating CAD-Models requires an external login to CADENAS.

Software

show all

Software

Software – IODD V1.1 (O200x.SP)
- (zip | 260 KB)

Downloads

show all

Data sheet

Data sheet – O200.SP-GW1J.72CV
- ZH (pdf | 751 KB)
Data sheet – O200.SP-GW1J.72CV
- FR (pdf | 678 KB)
Data sheet – O200.SP-GW1J.72CV
- DE (pdf | 679 KB)
Data sheet – O200.SP-GW1J.72CV
- EN (pdf | 679 KB)

Quickstart

Quickstart – O200 Xpert
- EN/DE/FR/ES/IT/ZH (pdf | 667 KB)

Software Manual

Operating instruction – O200 IO-Link
- EN (pdf | 1 MB)

Certificates / approvals

DoC / CoC - O200
- EN/DE/BG/CZ/DK/ES/FI/FR/GR/HU/IT/LT/LV/NL/NO/PL/PT/RO/SK/SI (pdf | 185 KB)

EPLAN

Link to dataportal
- Link to Data Portal

Drawings

show all

Accessories

show all

Peripherals

	IO-Link Master PROFINET, 8-Port, IP67 Article no.: 11215447	IP67 field device 8 ports for integrating sensors via IO-Link or I/O 2 PROFINET ports Supports Modbus/TCP and OPC UA
	IO-Link Master EtherNet/IP, 8-Port, IP67 Article no.: 11215460	IP67 field device 8 ports for integrating sensors via IO-Link or I/O 2 EtherNet/IP ports Supports Modbus/TCP and OPC UA
	IO-Link Master PROFINET, 8-Port, IP20 Article no.: 11215445	IP20 control cabinet device 8 ports for integrating sensors via IO-Link or I/O 2 PROFINET ports Supports Modbus/TCP and OPC UA
	IO-Link Master EtherNet/IP, 8-Port, IP20 Article no.: 11215448	IP20 control cabinet device 8 ports for integrating sensors via IO-Link or I/O 2 EtherNet/IP ports Supports Modbus/TCP and OPC UA
	ZTEST-ALL.DIGITAL Test unit for sensors digital Article no.: 11084377	LED (red/green) for digital PNP/NPN signals Teach-in of sensors with integrated Teach- button Connection for plug in power supply (available as accessory)
	ZTEST-ALL.ANALOG Test unit for sensors analog & digital Article no.: 11084376	Output via display (V or mA) or LED (PNP/NPN) Teach-in of sensors with integrated Teach- button Connection for plug in power supply (available as accessory)
	USB-C IO-Link Master Article no.: 11234828	Compact IO-Link master perfectly suited for testing and getting to know IO-Link sensors Simple power supply via USB-C Quick and easy connection with the Baumer Sensor Suite Specifically designed with the needs of engineering and service in mind
	SensControl Wireless IO-Link Master Article no.: 11214576	On-site configuration and monitoring of IO-Link devices (sensors/actuators) Communication via WLAN, Bluetooth LE and IO-Link Power supply by integrated rechargeable battery Increased mobility and easy to use via SensControl app

Mounting accessories

	10150326 Sensofix series 10 / series 20 Article no.: 10150326	Clamps made of stainless steel Ball pivots made of galvanized steel Mounting panel made of stainless steel
	ZADAP-200.STRAIGHT Mounting bracket O200 Article no.: 11206601	Material: stainless steel Content: Mounting bracket including screws/nuts for sensors with smooth and M3 threaded sleeves
	ZADAP-200.ANGLE_L Mounting bracket O200 (L design) Article no.: 11206602	Material: stainless steel Content: Mounting bracket including screws/nuts for sensors with smooth and M3 threaded sleeves
	ZADAP-200.ANGLE_S Mounting bracket O200 (S design) Article no.: 11206603	Material: stainless steel Content: Mounting bracket including screws/nuts for sensors with smooth and M3 threaded sleeves
	ZADAP-200.SERIES10 Mounting bracket O200 - Retrofit for sensors series 10 Article no.: 11208477	Material: plastic