2. Solutions
  3. Food and beverage
  4. Cleaning in place | CIP
Together we get safe and competitive CIP automation done
Teaser_Lebensmittelsicherheit_600x338.jpg

Food safety

State of the art technology leads to precise and safe cleaning processes.
Teaser_Investitionskosten_600x338.jpg

Investment

Tailored solutions for every demand combines safety and investment feasibility.
Teaser_Anlagenplanung_600x338.jpg

Efficient engineering

Straight structured systems support mechanical and electrical integration saving time in engineering, purchasing, installation and operation.
Teaser_Effizient_600x338.jpg

Efficient CIP operation

Smart technologies and hygienic integration enable accurate cleaning processes, saving time, energy, detergents and water.
Teaser_Partnerschaft_600x338.jpg

Reliable partner

Built for the application with decades of experience, the Baumer technology is made to last.
Teaser_One_Market_600x338.jpg

One stop shop

All relevant technologies with outstanding performance from one supplier. Single or as package.
Banner_CIP_1520x798.jpg

Teaser__CIP_Concentrate_dosing_600x338.jpg

Concentrate dosage

Accurate balancing of used cleaning concentrates helps to avoid overdosing, protecting both, plant and environment. 

Teaser__CIP_Quality_measuring_600x338.jpg

Quality measuring point phase separation

Reliable conductivity measurement with fast temperature compensation is the basis for successful cleaning cycles, optimizing the use of cleaning agents and fast, accurate phase separation. 

Teaser__CIP_Tank_temeprature_600x338.jpg

Tank temperature monitoring

Since temperature is one of the four main parameters, the correct temperature prevailing right at the start of the cleaning cycle saves valuable time. Temperature sensor CombiTemp® TFRH enables hygienic temperature measurement right inside the tank.

Teaser__CIP_Point_Level_600x338.jpg

Point level detection

Universal level switch CleverLevel® is the perfect protection for process and environment. Safe limit detection, optionally ignoring or detecting any foam formation, prevents tanks from damage and any escape of cleaning agents into the drains.

Teaser__CIP_Continuous_level_600x338.jpg

Continuous level measurement

Predictable medium availability: Flush mounted hydrostatic level measurement with CombiTemp PFMH with display, or PBMH without  display ensures the availability of cleaning agent for the next batch. The high accuracy of 0,1% is unaffected by temperature changes, foam or uneven surfaces.

Teaser__CIP_Pump_protection_600x338.jpg

Pump protection

Installing the switch CleverLevel® directly in-line with the CIP supply pump delivers reliable signals to avoid pump damage by dry run. Unaffected by build up, media characteristics and adherence, any lack of liquid that would disturb the cleaning will safely be detected.

Teaser__CIP_Heat_supply_600x338.jpg

Energy monitoring

The calorimetric flow sensor FlexFlow® provides both information, temperature and flow rate, that are required for determining the required energy for heating the CIP system with hot water.

Teaser__CIP_Condition_control_600x338.jpg

Differential pressure across the quality measuring point

Two sensitive pressure sensors PP20H installed in feed and return line detect changes in the CIP loop. Leakages causing pressure drops are recognized as well as increasing pressure pointing to blockages.

Teaser_CIP_Velocity_in_CIP_supply_600x338.jpg

Velocity in CIP supply

Flow sensor FlexFlow® ensures that already the supply pump delivers the desired velocity. Besides that, the flow and temperature data can be used to preset the heat exchanger operation. Both help to safe time until the desired quality parameter are reached and cleaning time counts.

Teaser__CIP_Quality_measuring_600x338.jpg

Quality measuring point temperature

Since temperature plays a major role for safe cleaning, the temperature sensor CombiTemp® TFRH offers excellent precision with quick response times.

Teaser__CIP_Velocity_control_600x338.jpg

Quality measuring point velocity control

The flow velocity in the return line indicates whether the entire cycle was cleaned at the desired speed. Electromagnetic flow meter PF75H with 0.2% accuracy delivers best-in-class performance and reporting stability of cleaning conditions. Further it remains unaffected by any temperature changes.

Teaser_Tank_blau_600x338.png

Level measurement in water tanks

To get insights whether there is sufficient water supply for the first rinse or enough space for additional final rinse water, the ultrasonic sensor UNAM measures the precise fill level up to a tank height of 6 m.

Teaser_Tank_lila_600x338.png

Level measurement in acidic tank

The contactless level detection with the high-precision radar sensor RR30 ensures that there is enough medium available for the next acid cleaning.

Scalable CIP solutions for perfect resource utilization

Teaser_E-Zch-7386_600x338.jpg

Single tank system for lost cleaning

  • Basic set of an automation solution for simple or very demanding cleaning processes
  • 4 sensors for 100% safety: 2 LBFS level switches, 1 conductivity sensor CombiLyz® AFI and one flow sensor FlexFlow PF20H for flow velocity and temperature measurement
Teaser_E-Zchn-7387_600x338.jpg

Standard 3 tank CIP with media recovery

  • Recovery of media and energy in level controlled and isolated buffer tanks
  • Next level of quality measurement, adding separate temperature sensor PT20H and electromagnetic flow meter CombiFlow® PF75H
Teaser_D-Zchn-7388_600x338.jpg

Advanced CIP system with fully automated media and energy control

  • Automated concentration adjustment with electromagnetic flow meter PF55H
  • Traceability of all quality and consumption data
  • Energy monitoring with calorimetric flow sensor FlexFlow PF20H 
  • In tank measurement enables short ramp up times for temperature and concentration. Hydrostatic pressure sensors PBMH, radar sensors RR30 or ultrasonic sensors UNAM ensure availability for the next run
  • PP20H pressure sensors detect leakages or blockages in the system

Webinar: Scalable CIP solutions

Teaser-Prozessautomation-CIP-900x506.jpg

Using the right sensors to implement efficient solutions for controlling CIP processes

The basis for efficient CIP cleaning is the selection of the appropriate technology. Find out how you can sustainably optimize CIP cleaning by using sensor technology and how you can equip your plant for the future now. Save energy, water, time and cleaning agents without risking compromises in product safety.
In our webinar we will show you how you can minimize bacterial contamination and comply with food safety regulations thanks to our Baumer hygiene connection.

The live webinar has already taken place, but save the recording now.

​​​​​​​
Request recording now
Request recording now

Energy monitoring with flow sensors

With the help of the flow sensor FlexFlow, Arla Foods was able for the first time to gain transparency regarding the energy consumption of its cottage cheese production. In addition to the flow quantity, the sensor also measures the temperature of the medium.
 

Product portfolio

Teaser_CIP_Leitfähigkeit_600x338.jpg

Conductivity

  • Small and compact sensor, both in and outside the process
  • Concentration curves can be stored
  • Fastest integrated temperature compensation
  • Measuring range 50 ... 1000 mS
  • Display with additional concentration value
Open in product selector
Teaser_CIP_Durchfluss_600x338 (1).jpg

Flow

  • Electromagnetic flow meter with 0.2% accuracy
  • Robust and compact stainless steel housing 
  • Calorimetric flow sensor for combined flow and temperature measurement
  • EMF for balancing the dosing of detergents
Open in product selector
Teaser_CIP_Temperatur_600x338 (1).jpg

Temperature

  • Fastest sensor with outstanding T90 time
  • Wide range of sensors, from flush to reduced tip
  • Flush sensor without ambient temperature influence
  • Available in all accuracy classes
Open in product selector
Teaser_CIP_Füllstandmessung_600x338.jpg

Continuous level measurement

  • Variety of suitable technologies for every type of application
  • Accurate hydrostatic sensors, unaffected by temperature changes
  • Ultrasonic sensors with narrow sonic cone
  • Accurate and contactless radar technology
Open in product selector
Teaser_CIP_Grenzstandmessung_600x338.jpg

Point level detection and process safety

  • Reliable switching independent of foam and adhesions
  • One sensor type for all media
  • Reliable switch to protect pumps and avoid overfilling also in case of aggressive media
  • 360° LED process 
Open in product selector
Teaser_CIP_Druck_600x338 (1).jpg

Pressure

  • Long lasting high accuracy
  • Robust, temperature compensated sensor with option for graphical display
  • Durable compact sensors in CIP and SIP conditions
  • Flush mounted hygienic process integration
Open in product selector

Questions?

Simply arrange a complimentary appointment with one of our experts.
Contact us

Downloads

Brochures/catalogues
To the top