2. Product Overview
  3. Rotary encoders / angle sensors
  4. Industrial encoders absolute
  5. EAM580
Product portfolio
The selected altAttribute does not exist!

58 mm – compact integrated real-time Ethernet with axial connection

MAGRES EAM580 Profinet

  • Shaft or blind hollow shaft
  • PROFINET, EtherCAT, EtherNet/IP
  • Industry 4.0 and IoT ready via OPC UA
Open in product selector
The selected altAttribute does not exist!

58 mm – clamping flange

MAGRES EAM580-SC

  • Solid shaft 10 mm (clamping flange)
  • SSI, CANopen, CANopen Lift, PROFINET, EtherCAT, EtherNet/IP
  • Additional incremental signals at SSI & CANopen
Open in product selector
The selected altAttribute does not exist!

58 mm – synchro flange

MAGRES EAM580-SY

  • Solid shaft 6 mm (synchro flange)
  • SSI, CANopen, CANopen Lift, PROFINET, EtherCAT, EtherNet/IP
  • Additional incremental signals at SSI & CANopen
Open in product selector
The selected altAttribute does not exist!

58 mm – blind hollow shaft

MAGRES EAM580-B

  • Hollow shaft 12 … 15 mm
  • SSI, CANopen, CANopen Lift, PROFINET, EtherCAT, EtherNet/IP 
  • Additional incremental signals at SSI & CANopen
Open in product selector
The selected altAttribute does not exist!

58 mm – Bearingless on-axis magnet encoders

MAGRES EAM580-K

  • Magnet bore 6 ... 12 mm
  • SSI, CANopen, CANopen Lift, PROFINET, EtherCAT, EtherNet/IP 
  • Additional incremental signals at SSI & CANopen
Open in product selector
Video "Robust precision"
 

MAGRES EAM are especially predestined for the tough outdoor application, such as for determining the boom position of a mobile crane. The use in safety-relevant applications up to PLd is possible thanks to ISO 13849 compliant firmware.

Your benefits
  • Reliable operation and reduced downtime also in rough environments
    • Robust magnetic sensing, ISO 13849 compliant firmware, shock resistant up to 500 g
  • Precise positioning, easy design-in
    • Angular accuracy up to ±0.15°
  • Easy & flexible product selection
    • Broad portfolio, all relevant shaft, flange and connector variants, all relevant interfaces
  • Excellent price-performance ratio
    • Reduced number of components, high modularity of the portfolio
  • Industrie 4.0 and IoT ready
    • Access to parameters and additional information via PROFINET & OPC UA, Cloud Service compatible for process optimization, e.g. preventive maintenance
Applications

Robust and precise detection of position and speed

  • Packaging
  • Medical industry
  • Handling and mounting systems
  • Wood, plastic or metal processing
  • Textile machinery
  • Elevators
Technology
The selected altAttribute does not exist!

PROFINET – for maximum availability

  • Increased machine and plant availability through Media Redundancy Protocol (MRP): In the event of line or switch failure in ring topology, the system continues to run fault-free. Only a warning message appears.
  • No pre-configuration before device replacement due to Link Layer Discovery Protocol (LLDP): In hard use, even the best devices can fail once. To enable a time-saving replacement, the OptoTurn EAL580 uses neighborhood recognition via LLDP. The same devices can be replaced at any time without pre-configuration.
  • Support of real-time (RT) and isochronous real-time (IRT) operating modes: The OptoTurn EAL580 always works according to the requirements of the application.
The selected altAttribute does not exist!

EtherCAT – for extremely fast and precise applications

  • Simple and intuitive commissioning: The device address is conveniently assigned e.g. using the TwinCAT commissioning software. Firmware updates of the encoder are controlled via the protocol file access over EtherCAT (FoE).
  • Minimum cycle time (62.5 μs) and low jitter: For demanding applications and high precision control of the machine in real-time.
  • Support of the operating modes Free Run, Synchronous Mode and Distributed Clocks. The OptoTurn EAL580 always adapts to the requirements of the respective application. Regardless of whether the values are freely determined or provided in a highly synchronous manner.

 

The selected altAttribute does not exist!

EtherNet/IP – for universal data access

  • Increased plant availability through Device Level Ring (DLR): In the case of an interruption in a plant network in ring topology, the OptoTurn EAL580 ensures that the encoder data are still sent to the control.
  • Integrated web server for process data access from the office network via control to the rotary encoder: Storage and analysis on any server or in the cloud. Access management and the highest security are ensured by the control system.
Downloads
Brochures / Catalogs

To the top