optoPulse EIL580P-SY

Size ø58 mm
Precise optical sensing (interpolated)
Output signal level programmable (TTL or HTL)
Synchro flange
Connection axial, radial or tangential
Pulses per revolution 1...65536, programmable
High protection up to IP 67
High resistance to shock and vibrations

available on request

Technical data

show all

Technical data - electrical ratings

Voltage supply

4.75...30 VDC

Reverse polarity protection

Short-circuit proof

Consumption w/o load

≤70 mA

Initializing time

≤ 30 ms after power on

Pulses per revolution

1 … 65536

Duty cycle

45…55 % typical at 1024, 2048 ppr (further see table Duty cycle)

Reference signal

Zero pulse 90° or 180°

Sensing method

Optical

Output frequency

≤300 kHz (TTL)
≤160 kHz (HTL)

Output signals

A+, B+, R+, A-, B-, R-

Output stages

TTL/RS422
HTL/push-pull

Programmable parameters

Output level TTL/HTL
Pulse number 1...65536
Zero pulse width 90°/180°
Zero pulse position
Signal sequence

Interference immunity

EN 61000-6-2

Emitted interference

EN 61000-6-3

Approval

UL 508 / CSA 22.2

Technical data - mechanical design

Size (flange)

ø58 mm

Shaft type

ø6 x 10 mm, solid shaft with flat

Admitted shaft load

≤40 N axial
≤80 N radial

Flange

Synchro flange

Protection EN 60529

IP 65 (without shaft seal)
IP 67 (with shaft seal)

Operating speed

≤6000 rpm (+20 °C, IP 67)
≤12000 rpm (+20 °C, IP 65)

Starting torque

≤0.015 Nm (+20 °C, IP 65)
≤0.02 Nm (+20 °C, IP 67)

Material

Housing: aluminium die-cast
Flange: aluminium
Solid shaft: stainless steel

Operating temperature

-40...+100 °C

Relative humidity

90 % non-condensing

Resistance

EN 60068-2-6
Vibration 30 g, 10-2000 Hz
EN 60068-2-27
Shock 300 g, 6 ms

Connection

Flange connector M12, 8-pin
Flange connector M23, 12-pin
Cable

Weight approx.

300 g

Software

show all

Software

Encoder Software v3.3 05.07.16
- (zip | 6 MB)

Downloads

show all

Data sheet

Data sheet – EIL580P-SY
- FR (pdf | 2 MB)
Data sheet – EIL580P-SY
- DE (pdf | 2 MB)
Data sheet – EIL580P-SY
- EN (pdf | 2 MB)
Data sheet – EIL580P-SY
- ZH (pdf | 3 MB)

Quickstart

EIL580
- DE/EN/FR/IT/ES (pdf | 1 MB)

Certificates / approvals

UL certificate E240061
- EN (pdf | 167 KB)

Brochures / Catalogs

EIL580P Programmable
- DE (pdf | 928 KB)
EIL580P Programmable
- EN (pdf | 927 KB)
EIL580P Programmable
- FR (pdf | 929 KB)

Declaration of conformity

DoC / CoC - EIL580P, ITD2PH00.2
- BG/CZ/DE/DK/EN/ES/FI/FR/GR/HU/KO/LT/LV/NL/NO/PL/PT/RO/SI/SK (pdf | 487 KB)

CAD

EIL580: Synchro flange (flute ø53 mm), solid shaft ø6 mm, cable axial, IP65 / STEP (EIL580-SY06.5Tx.xxxxx.A)
- (zip | 1 MB)
EIL580: Synchro flange (flute ø53 mm), solid shaft ø6 mm, cable axial, IP67 / STEP (EIL580-SY06.7Tx.xxxxx.A)
- (zip | 1 MB)
EIL580: Synchro flange (flute ø53 mm), solid shaft ø6 mm, cable radial, IP65 / STEP (EIL580-SY06.5Rx.xxxxx.A)
- (zip | 1 MB)
EIL580: Synchro flange (flute ø53 mm), solid shaft ø6 mm, cable radial, IP67 / STEP (EIL580-SY06.7Rx.xxxxx.A)
- (zip | 1 MB)
EIL580: Synchro flange (flute ø53 mm), solid shaft ø6 mm, cable tangential, IP65 / STEP (EIL580-SY06.5Px.xxxxx.A)
- (zip | 921 KB)
EIL580: Synchro flange (flute ø53 mm), solid shaft ø6 mm, cable tangential, IP67 / STEP (EIL580-SY06.7Px.xxxxx.A)
- (zip | 832 KB)
EIL580: Synchro flange (flute ø53 mm), solid shaft ø6 mm, connector M12 axial, IP65 / STEP (EIL580-SY06.5Ax.xxxxx.A)
- (zip | 951 KB)
EIL580: Synchro flange (flute ø53 mm), solid shaft ø6 mm, connector M12 axial, IP67 / STEP (EIL580-SY06.7Ax.xxxxx.A)
- (zip | 965 KB)
EIL580: Synchro flange (flute ø53 mm), solid shaft ø6 mm, connector M12 radial, IP65 / STEP (EIL580-SY06.5Bx.xxxxx.A)
- (zip | 955 KB)
EIL580: Synchro flange (flute ø53 mm), solid shaft ø6 mm, connector M12 radial, IP67 / STEP (EIL580-SY06.7Bx.xxxxx.A)
- (zip | 963 KB)
EIL580: Synchro flange (flute ø53 mm), solid shaft ø6 mm, connector M23 axial, IP65 / STEP (EIL580-SY06.5Dx.xxxxx.A)
- (zip | 495 KB)
EIL580: Synchro flange (flute ø53 mm), solid shaft ø6 mm, connector M23 axial, IP67 / STEP (EIL580-SY06.7Dx.xxxxx.A)
- (zip | 499 KB)
EIL580: Synchro flange (flute ø53 mm), solid shaft ø6 mm, connector M23 radial, IP65 / STEP (EIL580-SY06.5Fx.xxxxx.A)
- (zip | 1 MB)
EIL580: Synchro flange (flute ø53 mm), solid shaft ø6 mm, connector M23 radial, IP67 / STEP (EIL580-SY06.7Fx.xxxxx.A)
- (zip | 1 MB)

Accessories

show all

Mounting accessories

	Coupling CPS25 (L=19, D1=06 / D2=06) For encoder with solid shaft Article no.: 11065916	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Coupling CPS25 (L=19, D1=06 / D2=08) For encoder with solid shaft Article no.: 11065917	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Coupling CPS25 (L=19, D1=10 / D2=06) For encoder with solid shaft Article no.: 11065922	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Coupling CPS25 (L=19, D1=11 / D2=06) For encoder with solid shaft Article no.: 11065926	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Coupling CPS25 (L=19, D1=12 / D2=06) For encoder with solid shaft Article no.: 11065928	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Spring washer coupling (D1=6 / D2=6) For encoder with solid shaft Article no.: 10141131	Backlash-free and angle-synchronous transmission of rotary movements Plug-in version Electric isolated Suitable for very high speeds Good compensation of all misalignments
	Spring washer coupling (D1=6 / D2=10) For encoder with solid shaft Article no.: 10141132	Backlash-free and angle-synchronous transmission of rotary movements Plug-in version Electric isolated Suitable for very high speeds Good compensation of all misalignments
	Spring washer coupling (D1=6 / D2=16) For encoder with solid shaft Article no.: 11034139	Backlash-free and angle-synchronous transmission of rotary movements Plug-in version Electric isolated Suitable for very high speeds Good compensation of all misalignments
	Bellows coupling (D1=06 / D2=10) For encoder with solid shaft Article no.: 11050507	Backlash-free angle-synchronous transmission Optimum compensation of misalignments Very high torsional spring stiffness Small restoring force Vibration damping Stainless steel bellows
	Mounting adaptor For encoders with synchro flange Article no.: 10117667	Glass-fiber reinforced plastic Excellent resistance against temperature and chemicals Electrically isolated encoder mount
	Set of eccentric fixings for mounting clamp (10117667) Article no.: 10117668	With 3x eccentric fixings, screws and nuts
	Set of eccentric fixings type A Article no.: 11065545	With 3 eccentric fixings type A
	Bearing flange for encoders with synchro flange (Z 119.035) Article no.: 10158124	For all encoder with synchro flange and 6 mm shaft Material: Aluminium, bare

Connectors and cables

	Connection cable 5 m shielded with female connector M12, 8-pin, straight (ESG 34FH0500G) Article no.: 10129332	Connection cable shielded with female connector M12, shielding on cap nut Cable length 5 m 8-pin version Cable coating PUR Halogen-free Suitable for flexible cable carriers UL listed, number E315836
	Connection cable 10 m shielded with female connector M12, 8-pin, straight (ESG 34FH1000G) Article no.: 10129333	Connection cable shielded with female connector M12, shielding on cap nut Cable length 10 m 8-pin version Cable coating PUR Halogen-free Suitable for flexible cable carriers UL listed, number E315836
	Connection cable 2 m shielded with female connector M12, 8-pin, angled (ESW 33FH0200G) Article no.: 11053961	Connection cable shielded with female connector M12, shielding on cap nut Cable length 2 m 8-pin version Cable coating PUR Halogen-free Suitable for flexible cable carriers UL listed, number E315836
	Connection cable 5 m shielded with female connector M12, 8-pin, angled (ESW 33FH0500G) Article no.: 11053962	Connection cable shielded with female connector M12, shielding on cap nut Cable length 5 m 8-pin version Cable coating PUR Halogen-free Suitable for flexible cable carriers UL listed, number E315836
	Connection cable 10 m shielded with female connector M12, 8-pin, angled (ESW 33FH1000G) Article no.: 10170054	Connection cable shielded with female connector M12, shielding on cap nut Cable length 10 m 8-pin version Cable coating PUR Halogen-free Suitable for flexible cable carriers UL listed, number E315836
	Female connector M23, 12-pin, CW Article no.: 10164705	Connector M23: 12-pin, female, clockwise (CW). Suitable for cable connection to flange connector M23 (12-pin, male, counter-clockwise (CCW)). EMC version Temperature range -40...+100 °C
	Female connector M23, 12-pin, CW, with cable 1 m - EIL580P Article no.: 11212849	Connection cable shielded with female connector M23, open cable end Cable [6x2x0.14 mm²], cable length 1 m Cable coating PUR Colour code according to DIN 47100 UL/CSA approval Connector M23: 12-pin, female, clockwise (CW). Suitable for cable connection to flange connector M23 (12-pin, male, counter-clockwise (CCW)). Temperature range -40...+100 °C (fixed installation) Pin 7 for R-Set
	Female connector M23, 12-pin, CW, with cable 2 m - EIL580P Article no.: 11212870	Connection cable shielded with female connector M23, open cable end Cable [6x2x0.14 mm²], cable length 2 m Cable coating PUR Colour code according to DIN 47100 UL/CSA approval Connector M23: 12-pin, female, clockwise (CW). Suitable for cable connection to flange connector M23 (12-pin, male, counter-clockwise (CCW)). Temperature range -40...+100 °C (fixed installation) Pin 7 for R-Set
	Female connector M23, 12-pin, CW, with cable 5 m - EIL580P Article no.: 11212871	Connection cable shielded with female connector M23, open cable end Cable [6x2x0.14 mm²], cable length 5 m Cable coating PUR Colour code according to DIN 47100 UL/CSA approval Connector M23: 12-pin, female, clockwise (CW). Suitable for cable connection to flange connector M23 (12-pin, male, counter-clockwise (CCW)). Temperature range -40...+100 °C (fixed installation) Pin 7 for R-Set
	Female connector M23, 12-pin, CW, with cable 10 m - EIL580P Article no.: 11212872	Connection cable shielded with female connector M23, open cable end Cable [6x2x0.14 mm²], cable length 10 m Cable coating PUR Colour code according to DIN 47100 UL/CSA approval Connector M23: 12-pin, female, clockwise (CW). Suitable for cable connection to flange connector M23 (12-pin, male, counter-clockwise (CCW)). Temperature range -40...+100 °C (fixed installation) Pin 7 for R-Set

Programming accessories

	Handheld Programming Tool Z-PA-EI-H Article no.: 11120657	Battery operated stand-alone solution Intuitive, fully menu-driven programming Four user-assigned buttons for simple and quick programming Memory of several encoder configurations Backlit display LED status indicator Encoder diagnostic functions
	PC Programming Tool Z-PA-EI-P For programmable encoders EIL580P, HS35P, ITD2PH00.2 Article no.: 11120547	PC Programming Tool incl. Encoder Software Easy and intuitive operation Memory of several encoder configurations Encoder diagnostics with monitor output USB powered Product documentation by printing customized product labels
	Connection cable connector M12 / connector D-SUB, 0.2 m Article no.: 11119280	Connecting cable shielded with connector M12, 8-pin, female contacts on connector D-SUB, 9-pin, male contacts
	Connection cable connector M12 / connector D-SUB, 1 m Article no.: 11119720	Connecting cable shielded with connector M12, 8-pin, female contacts on connector D-SUB, 9-pin, male contacts
	Connection cable connector M23 (CW) / connector D-SUB, 0.2 m Article no.: 11119257	Connecting cable shielded with connector M23, 12-pin, female contacts, clockwise (CW) on connector D-SUB, 9-pin, male contacts
	Connection cable connector M23 (CW) / connector D-SUB, 1 m Article no.: 11119723	Connecting cable shielded with connector M23, 12-pin, female contacts, clockwise (CW) on connector D-SUB, 9-pin, male contacts