O200.RP-GW2I.72CV/A014

Article no.: 11230719

Extended functional reserve capacities for maximum reliability
Baumer PinPoint LED: Small, homogeneous light spot with sharp edges
IO-Link interface independent of the switching output (Dual Channel)
Extended parameterization options and additional diagnostic data
Robust housing with stainless steel spacer sleeves

9 pieces immediately available from stock

Technical data

show all

General data

Type

Retro-reflective sensor

Version

IO-Link dual channel

Light source

Pulsed PinPoint LED

Actual range Sb

Nominal range Sn

Smallest object recognizable typ.

4 mm (FTAR 013A000)

Polarization filter

Alignment / soiled lens indicator

Flashing output indicator

Output indicator

LED yellow

Power on indication

LED green

Sensitivity adjustment

IO-Link

Wave length

644 nm

Suppression of reciprocal influence

Alignment optical axis

< 1,5°

Electrical data

Response time / release time

< 0.4 ms

Jitter

< 0.21 ms

Voltage supply range +Vs

10 … 30 VDC

Current consumption max. (no load)

45 mA (@ 10 VDC)

Current consumption typ.

16 mA (@ 24 VDC)

Voltage drop Vd

<2 VDC

Output function

Light / dark operate

Output circuit

Push-pull

Output current

50 mA

Short circuit protection

Reverse polarity protection

Communication interface

Baud rate

38.4 kBaud (COM 2)

Adjustable parameters

Switching point
Time filters
LED status indicators
Output logic
Output circuit
Counter
Deactivate the sensor element
Find Me function
Teach-in mode

IO-Link port type

Class A

Process data length

32 Bit

Process data structure

Bit 0 = SSC1 (presence)
Bit 2 = quality
Bit 3 = alarm
Bit 5 = SSC4 (counter)
Bit 16-31 = 16 Bit measurement

Interface

IO-Link V1.1

Additional data

Signal strength
Excess gain
Operating cycles
Device temperature

Cycle time

≥ 2.7 ms

Mechanical data

Width / diameter

8 mm

Height / length

25.1 mm

Depth

15.8 mm

Design

Rectangular

Mechanical mounting

Sleeve smooth (stainless steel)

Housing material

Plastic (ASA, PMMA)

Front (optics)

PMMA

Connection types

Cable 4 pin, 2 m

Cable characteristics

PVC / PVC 4 x 0.08 mm²

Ambient conditions

Operating temperature

-25 … +50 °C

Protection class

IP 67

3D-Model

show all

3D-Model

Generating CAD-Models requires an external login to CADENAS.

Software

show all

Software

Software – IODD V1.1 (O200x.RP A014)
- (zip | 259 KB)

Downloads

show all

Data sheet

Data sheet – O200.RP-GW2I.72CV/A014
- ZH (pdf | 1 MB)
Data sheet – O200.RP-GW2I.72CV/A014
- FR (pdf | 1 MB)
Data sheet – O200.RP-GW2I.72CV/A014
- DE (pdf | 1 MB)
Data sheet – O200.RP-GW2I.72CV/A014
- EN (pdf | 1 MB)

Operating Manual

Quickstart – O200 Fixed Settings
- EN/DE/FR/ES/IT/ZH (pdf | 405 KB)

Software Manual

Operating instruction – O200 IO-Link
- EN (pdf | 1 MB)

Certificates / approvals

DoC / CoC - O200
- EN/DE/BG/CZ/DK/ES/FI/FR/GR/HU/IT/LT/LV/NL/NO/PL/PT/RO/SK/SI (pdf | 185 KB)

EPLAN

Link to dataportal
- Link to Data Portal

Diagrams

show all

Excess gain curve

The selected altAttribute does not exist!

(png | 248 KB)

(png | 245 KB)

Drawings

show all

Connection diagram

(png | 100 KB)

Beam characteristic (typically)

(png | 109 KB)

Accessories

show all

Reflectors

	ZREFL-200.STANDARD Reflector rectangular Article no.: 11206604	Fastening method screw mounting With attached reflective tape For Retro-reflective sensors Mounting compatible to series 200
	FTDR 084A084 Reflector rectangular 84 x 84 mm Article no.: 11101254	Fastening method screw mounting For Retro-reflective sensors
	FTDR 010A014 Reflector rectangular 16,8 x 12,8 mm Article no.: 10123622	Fastening method self-adhesive For Retro-reflective sensors
	FTDR 015A038 Reflector rectangular 40 x 18 mm Article no.: 10128191	Fastening method self-adhesive For Retro-reflective sensors
	FTDR 017A027 Reflector rectangular 43 x 20,3 mm Article no.: 10145962	Fastening method screw mounting Micro structure For Retro-reflective sensors
	FTDR 029A046 Reflector rectangular 48 x 32,5 mm Article no.: 10125741	Fastening method self-adhesive For Retro-reflective sensors
	FTDR 047A048 Reflector rectangular 75 x 54 mm Article no.: 10145961	Fastening method screw mounting For Retro-reflective sensors
	FTAR 013A000 Reflector round Ø 15 mm Article no.: 10145963	Fastening method self-adhesive Micro structure For Retro-reflective sensors
	FTAR 019A000 Reflector round Ø 21 mm Article no.: 11107543	Fastening method self-adhesive For Retro-reflective sensors
	FTAR 020A000 Reflector round Ø 25,2 mm Article no.: 10138929	Fastening method self-adhesive Micro structure For Retro-reflective sensors
	FTAR 038A000 Reflector round Ø 46 mm Article no.: 11006499	Fastening method self-adhesive For Retro-reflective sensors
	FTDF 020F020 Reflective tape rectangular 20 x 20 mm Article no.: 10128299	Fastening method self-adhesive For laser light sensors
	Z-FTDF 050K0100 Reflective type rectangular 50 x 100 mm Article no.: 11120355	Fastening method self-adhesive For Retro-reflective sensors

Peripherals

	ZTEST-ALL.DIGITAL Test unit for sensors digital Article no.: 11084377	LED (red/green) for digital PNP/NPN signals Teach-in of sensors with integrated Teach- button Connection for plug in power supply (available as accessory)
	ZTEST-ALL.ANALOG Test unit for sensors analog & digital Article no.: 11084376	Output via display (V or mA) or LED (PNP/NPN) Teach-in of sensors with integrated Teach- button Connection for plug in power supply (available as accessory)
	USB-C IO-Link Master Article no.: 11234828	Compact IO-Link master perfectly suited for testing and getting to know IO-Link sensors Simple power supply via USB-C Quick and easy connection with the Baumer Sensor Suite Specifically designed with the needs of engineering and service in mind

Mounting accessories

	10150326 Sensofix series 10 / series 20 Article no.: 10150326	Clamps made of stainless steel Ball pivots made of galvanized steel Mounting panel made of stainless steel
	ZADAP-200.STRAIGHT Mounting bracket O200 Article no.: 11206601	Material: stainless steel Content: Mounting bracket including screws/nuts for sensors with smooth and M3 threaded sleeves
	ZADAP-200.ANGLE_L Mounting bracket O200 (L design) Article no.: 11206602	Material: stainless steel Content: Mounting bracket including screws/nuts for sensors with smooth and M3 threaded sleeves
	ZADAP-200.ANGLE_S Mounting bracket O200 (S design) Article no.: 11206603	Material: stainless steel Content: Mounting bracket including screws/nuts for sensors with smooth and M3 threaded sleeves
	ZADAP-200.SERIES10 Mounting bracket O200 - Retrofit for sensors series 10 Article no.: 11208477	Material: plastic