O200.ER-GL1E.72CV/H006_T003

Article no.: 11212645

Most secure object detection due to the barrier principle
Easy to adjust via line teach
Intiutive Xpress Teach / 1-Step Teach method
Quick mounting by means of M3 threaded bushes made of stainless steel

7 pieces immediately available from stock

Technical data

show all

General data

Type

Through beam sensor

Emitter / receiver

Receiver

Actual range Sb

Nominal range Sn

Smallest object recognizable typ.

5 mm (0,5 mm with aperture)

Alignment / soiled lens indicator

Flashing output indicator

Output indicator

LED yellow

Power on indication

LED green

Sensitivity adjustment

Teach-in: remote / 1-Step Teach-in

Suppression of reciprocal influence

Electrical data

Response time / release time

< 0.5 ms

Voltage supply range +Vs

10 … 30 VDC

Current consumption max. (no load)

20 mA (@ 30 VDC)

Current consumption typ.

16 mA (@ 24 VDC)

Voltage drop Vd

<2 VDC

Output function

Light operate

Output circuit

Push-pull

Output current

50 mA

Short circuit protection

Reverse polarity protection

Mechanical data

Width / diameter

8 mm

Height / length

25.1 mm

Depth

14.1 mm

Design

Rectangular

Mechanical mounting

Threaded sleeves M3 (stainless steel)

Housing material

Plastic (ASA, PMMA)

Front (optics)

PMMA

Connection types

Cable 4 pin, 2 m

Cable characteristics

PVC / PVC 4 x 0.08 mm²

Ambient conditions

Operating temperature

-25 … +50 °C

Protection class

IP 67

3D-Model

show all

3D-Model

Generating CAD-Models requires an external login to CADENAS.

Downloads

show all

Data sheet

Data sheet – O200.ER-GL1E.72CV/H006_T003
- ZH (pdf | 789 KB)
Data sheet – O200.ER-GL1E.72CV/H006_T003
- FR (pdf | 748 KB)
Data sheet – O200.ER-GL1E.72CV/H006_T003
- DE (pdf | 744 KB)
Data sheet – O200.ER-GL1E.72CV/H006_T003
- EN (pdf | 741 KB)

Quickstart

Quickstart – O200 Xpress
- EN/DE/FR/ES/IT/ZH (pdf | 638 KB)

Certificates / approvals

DoC / CoC - O200
- EN/DE/BG/CZ/DK/ES/FI/FR/GR/HU/IT/LT/LV/NL/NO/PL/PT/RO/SK/SI (pdf | 185 KB)

EPLAN

Link to dataportal
- Link to Data Portal

Diagrams

show all

Excess gain curve

The selected altAttribute does not exist!

(png | 217 KB)

Drawings

show all

Drawings

(png | 36 KB)

Connection diagram

(png | 78 KB)

Accessories

show all

Fitting emitter

	O200.TR-ZZZX.72CV Through beam sensors - miniature Article no.: 11210548	Most secure object detection due to the barrier principle Test input for deactivating the transmitter diode Robust housing with stainless steel spacer sleeves
	O200.TR-ZZZX.72CV/H006 Through beam sensors - miniature Article no.: 11210571	Most secure object detection due to the barrier principle Test input for deactivating the transmitter diode Quick mounting by means of M3 threaded bushes made of stainless steel
	O200.TR-ZZZX.72NV Through beam sensors - miniature Article no.: 11210278	Most secure object detection due to the barrier principle Test input for deactivating the transmitter diode Robust housing with stainless steel spacer sleeves
	O200.TR-ZZZX.72NV/H006 Through beam sensors - miniature Article no.: 11212649	Most secure object detection due to the barrier principle Test input for deactivating the transmitter diode Quick mounting by means of M3 threaded bushes made of stainless steel

Peripherals

	ZTEST-ALL.DIGITAL Test unit for sensors digital Article no.: 11084377	LED (red/green) for digital PNP/NPN signals Teach-in of sensors with integrated Teach- button Connection for plug in power supply (available as accessory)
	ZTEST-ALL.ANALOG Test unit for sensors analog & digital Article no.: 11084376	Output via display (V or mA) or LED (PNP/NPN) Teach-in of sensors with integrated Teach- button Connection for plug in power supply (available as accessory)

Mounting accessories

	10150326 Sensofix series 10 / series 20 Article no.: 10150326	Clamps made of stainless steel Ball pivots made of galvanized steel Mounting panel made of stainless steel
	ZADAP-200.STRAIGHT Mounting bracket O200 Article no.: 11206601	Material: stainless steel Content: Mounting bracket including screws/nuts for sensors with smooth and M3 threaded sleeves
	ZADAP-200.ANGLE_L Mounting bracket O200 (L design) Article no.: 11206602	Material: stainless steel Content: Mounting bracket including screws/nuts for sensors with smooth and M3 threaded sleeves
	ZADAP-200.ANGLE_S Mounting bracket O200 (S design) Article no.: 11206603	Material: stainless steel Content: Mounting bracket including screws/nuts for sensors with smooth and M3 threaded sleeves
	ZADAP-200.SERIES10 Mounting bracket O200 - Retrofit for sensors series 10 Article no.: 11208477	Material: plastic

Lenses and components

	ZBLEN-200.R_0.5MM Slot aperture stickers series 200 Article no.: 11206587	Material: stainless steel Contents: 6 pieces (3 Sets) screw mounting Aperture: Ø 0,5 mm
	ZBLEN-200.R_1MM Slot aperture stickers series 200 Article no.: 11206589	Material: stainless steel Contents: 6 pieces (3 Sets) screw mounting Aperture: Ø 1 mm
	ZBLEN-200.R_1.5MM Slot aperture stickers series 200 Article no.: 11206610	Material: stainless steel Contents: 6 pieces (3 Sets) screw mounting Aperture: Ø 1,5 mm
	ZBLEN-200.R_2MM Slot aperture stickers series 200 Article no.: 11206611	Material: stainless steel Contents: 6 pieces (3 Sets) screw mounting Aperture: Ø 2 mm
	ZBLEN-200.MIXED Slot aperture stickers series 200 Article no.: 11206614	Material: stainless steel Contents: 1 pieces screw mounting Aperture: Round Ø 0,5 mm, 1 mm, 1,5 mm, 2 mm Aperture: Slit 0,5 x 3 mm vertical, 0,5 x 3 mm horizontal
	ZBLEN-200.SLIT_HOR Slot aperture stickers series 200 Article no.: 11206613	Material: stainless steel Contents: 6 pieces (3 Sets) screw mounting Aperture: 0,5 mm x 3 mm horizontal
	ZBLEN-200.SLIT_VER Slot aperture stickers series 200 Article no.: 11206612	Material: stainless steel Contents: 6 pieces (3 Sets) screw mounting Aperture: 0,5 mm x 3 mm vertical