VCXU-32M

Article no.: 11165814

2048 x 1536 px
Sony IMX265
1/1.8" CMOS
55 fps
USB 3.0

No longer available

We gladly assist you in selecting alternatives

Alternative product: VCXU.2-32M

Compare products

Technical data

show all

Sensor information

Sensor

Sony IMX265 Gen2

Mono/Color

Mono

Sensor type

1/1.8″ CMOS

Shutter type

Global shutter

Resolution

2048 × 1536 px

Pixel size

3.45 × 3.45 µm

Exposure time

0.001 … 60000 ms

Data quality (EMVA 1288 typical)

Dark noise

2 e-

Saturation capacity

9246 e-

Dynamic range

70.8 dB

Signal-to-noise ratio

39.7 dB

Quantum efficiency

65.7 % @ 536 nm
65.4 % @ 533 nm

Acquisition formats

Image formats, interface frame rate max.

Full Frame, 2048 × 1536 px, max. 55 fps
Binning 2×2, 1024 × 768 px, max. 55 fps
Binning 2×1, 1024 × 1536 px, max. 55 fps
Binning 1×2, 2048 × 768 px, max. 55 fps

Image formats, aquisition frame rate max. (Burst Mode)

Full Frame, 2048 × 1536 px, max. 55 fps

Pixel formats

Mono8
Mono10
Mono12
Mono12 Packed

Image preprocessing

Analog controls

Gain (0 … 48 dB)
Offset (0 … 255 LSB 12 Bit)

Color models

Mono

Camera features

Basic Functions

Exposure
Gain
Trigger / Exposure Active (Flash)
Binning 2x2
Partial Scan
Offset
Free Running Mode (Live Image)

Auto Functions

Exposure Auto
Gain Auto

Image Pre-processing

Image Flipping (X/Y)
LUT / Gamma

Acquisition / Interface

Burst Mode
Adjustable Framerate
Short Exposure Time Enable
Device Link Throughput Limit
Internal Image Buffer

Synchronization

free running
trigger

Trigger sources

Hardware
Software

Trigger delay

0 … 2 s, tracking and buffering of up to 256 trigger signals

Process Synchronization

Events
Timer
Trigger Delay
Debouncer
Counter
Sequencer
Trigger via Action CMD (GigE)
Additional Output Modes (e.g. Trigger Ready)
Chunk data inside transferred image
Encoder support via Counter End trigger source

Additional Functions

User Set
Integrated temperature sensor
Readable additional information (e.g. sensor information)
Save Custom Data

Internal image buffer

432 MB
48 images (Trigger Mode)
1 image (Free Running Mode)

Interfaces and connectors

Data interface

USB 3.0, Transfer Rate 5000 Mbits/sec, Connector: USB 3.0 Micro B

Process interface

M8 / 8 pins (SACC-DSI-M8MS-8CON-M8-L180)

Power supply

via USB 3.0 interface

Mechanical data

Lens mount

C-mount

Width

29 mm

Height

29 mm

Depth

38 mm

Weight

≤ 90 g

Material

zinc die casting, baked varnish (until 02-2020 nickel-chrome-plated), IP 40

Electrical data

Power consumption

Approx. 2.8 W @ 55 fps

Operating voltage

5 VDC (via USB3.0 interface)

Non-volatile memory

Flash memory size

128 kB

Environmental conditions

Operating temperature

0 … +65 ° @ T = measurement point

Storage temperature

-20 … +70 °C

Humidity

10 … 90 % (non-condensing)

Protection class

IP 40 (with mounted lens and cable)

Digital I/Os

Lines

1 input line
1 output line
2 general purpose lines

Conformity

Conformity

CE
RoHS
UL recognized
EAC
BIS-CRS (R-41207004)

Software

show all

Software packages

Baumer neoAPI (Windows, Linux, Linux ARM)
- Link
Baumer Camera Explorer (Windows, Linux, Linux ARM)
- Link
Baumer GAPI SDK v2.x (Windows, Linux, Linux ARM)
- Link
Baumer GAPI software examples
- Link
Third Party Software
- Link

Downloads

show all

Data sheet

Data sheet – VCXU-32M
- DE (pdf | 865 KB)
Data sheet – VCXU-32M
- EN (pdf | 864 KB)
Detailed data sheet – VCXU-32M
- EN (pdf | 501 KB)

Quickstart

Quick Start Guide VCXU cameras
- EN (pdf | 867 KB)

Operating Manual

User’s Guide VCXG / VCXG.I / VCXU cameras
- EN (pdf | 11 MB)

Certificates / approvals

CE certification
- EN/DE/BG/CZ/DK/ES/FI/FR/GR/HU/IT/LT/LV/NL/NO/PL/PT/RO/SK/SI (pdf | 280 KB)
UL certification
- EN (pdf | 506 KB)

Additional information

EMVA 1288 Summary Sheet
- EN (pdf | 223 KB)
Compliant list for Baumer industrial cameras (USB 3.0)
- EN (pdf | 642 KB)

Application notes

Application Notes
- Link

CAD

VCXU-32M / STEP
- (zip | 594 KB)

Drawings

show all

Dimension drawing

The selected altAttribute does not exist!

(png | 94 KB)

Accessories

show all

Starter Kit

VCXU Starter Kit

Article no.: 11165159

USB 3.0 PCIe interface board (2 ports)
USB 3.0 cable, 3,0 m
process interface cable 5,0 m
Mounting Adapter Type E
Software (WINDOWS, LINUX, LINUX ARM) via Download
camera not included

PCIe/Adapter

	ZVA-PCIe_2x_external_USB_3.0 Article no.: 11141165	PCI Express USB 3.0 interface board PCIe x1 (single lane) 2 ports single lane incl. 16.5 cm adapter cable SATA male connector to 1x SATA female connector and 1x Molex female connector cable with Molex connector for PC power supply mini bracket
	ZVA-IOI PCIe USB3.0 Quad Channel 4 Port PCIe USB 3.0, 4 ports Article no.: 11119094	PCI Express USB 3.0 interface board with 4 ports Express Bus x4 Gen 2 supports screw lock connectors

Housing accessories

	Housing base set B V4A VCXG.I r IP69K Article no.: 11207844	Stainless steel housing base set for Pharma and Food & Beverage applications (incl. Splash and food zones) Hygienic design (design according to EHEDG guidelines) to house VCXG.I cameras, IP69K protection Housing corpus with clamp elements to position the chosen VCXG.I camera M40 hygienic gland and M40 stainless steel counter nut to for fixation at the machine wall sealed up cable gland for IP68 protection inside the machine To be ordered separately: stainless steel lens protection Tube M60 V4A IP69K (11208732) necessary to close the housing
	Clamp Elements CX 29 x 29 mm V4A IP69K Article no.: 11217114	Clamp elements to insert standard CX series cameras (VCXG and VCXU) into the “Housing base set B V4A VCXG.I r IP69K” (11207844)
	Housing V4A IP69K Mounting Tool Article no.: 11208719	Mounting tool to seal the stainless steel V4A VCXG.I r IP69K housing system
	Tube M60 V4A IP69K Acryl Article no.: 11208732	stainless steel lens protection with PMMA cover glass (FDA certified) suitable for Housing base set B V4A VCXG.I r IP69K (11208744) thread: M60 length 31 mm
	Cover Glass Replacement Acryl 2" Article no.: 11217113	Replacement cover glass for exchange in "Tube M60 V4A IP69K Acryl" (11208732) PMMA material FDA certified
	Sealing ReplacementSet Housing V4A IP69K Article no.: 11217115	Complete sealing replacement set to exchange all sealings of the stainless steel V4A VCXG.I r IP69K housing system using the "Tube M60 V4A IP69K Acryl" incl. Flouroprene XP41 sealings, TPU sealing, EPDM O-rings (inside only)
	Rotation lock M40 VA4 IP69K Article no.: 11208731	Rotation lock for Housing base set B V4A VCXG.I r IP69K (11208744) with clamping part for safe position locking

Lens accessories

	Filter CL/27 (R2) ROT PENTAX Article no.: 11006551	Ricoh color filter (red)
	Filter Pol PENTAX PL27 Article no.: 11092000	Ricoh polarization filter linear filter thread
	ZVI-FILTER POL. PL30.5 C91353 Article no.: 11175428	Ricoh polarization filter linear filter thread M30.5
	ZVI-Filter Pol. PL40.5 C91301 Article no.: 11167713	Ricoh polarization filter linear filter thread M40.5
	ZVL-Adapter S-Mount / C-Mount Article no.: 11167984	Adapter S-mount / C-mount
	ZVF-Filter Holder Mounting Tool Article no.: 11177601	Mounting tool to screw in filter holders
	Close-up ring set ZVS-FP-RGST six-piece Article no.: 11010529	Close-up ring set ZVS-FP-RGST six-piece 0,5, 1, 5, 10, 20, 40 mm
	ZVK-IR/UV Filter Sealing Pack 2.06*9.83 Article no.: 11177565	5 IR/UV cut filters and sealings for VCX cameras with Sony IMX250 and IMX265 sensors to install a filter in monochrome models The exchange causes a modification of the optical distance and makes the focal flange distance longer. Please check the suitability of the chosen lens.

Lens

	ZVL-E3196B Article no.: 11701908	Evetar lens 12 mm F 2,0 format 1/1,8" M.O.D. 0,3 m S-mount
	ZVL-M0828-MPW3 Article no.: 11703660	Computar lens 8 mm F 2,8-16 format 2/3″ M.O.D. 0,1 m locating screw for aperture and focus C-mount
	ZVL-M1228-MPW3 Article no.: 11704871	Computar lens 12 mm F 2,8-16 format 2/3″ M.O.D. 0,1 m locating screw for aperture and focus C-mount
	ZVL-M1628-MPW3 Article no.: 11704872	Computar lens 16 mm F 2,8-16 format 2/3″ M.O.D. 0,25 m locating screw for aperture and focus C-mount
	ZVL-M2528-MPW3 Article no.: 11704873	Computar lens 25 mm F 2,8-16 format 2/3″ M.O.D. 0,2 m locating screw for aperture and focus C-mount
	ZVL-M3528-MPW3 Article no.: 11704874	Computar lens 35 mm F 2,8-16 format 2/3″ M.O.D. 0,25 m locating screw for aperture and focus C-mount
	ZVL-M5028-MPW3 Article no.: 11704875	Computar lens 50 mm F 2,8-16 format 2/3″ M.O.D. 0,3 m locating screw for aperture and focus C-mount
	ZVL-LM6HC Article no.: 11215056	Kowa lens 6 mm F 1,8-16 format 1" M.O.D. 0,1 m C-mount
	Obj Kowa LM8HC 8mm/f1,4 Article no.: 11092599	Kowa lens 8 mm F 1,4-16 format 1" M.O.D. 0,1 m C-mount
	Obj Kowa LM12HC 12mm/f1,4 Article no.: 11092600	Kowa lens 12,5 mm F 1,4-16 format 1" M.O.D. 0,3 m C-mount
	Obj Kowa LM16HC 16mm/f1,4 Article no.: 11092601	Kowa lens 16 mm F 1,4-16 format 1" M.O.D. 0,3 m C-mount
	Obj Kowa LM25HC 25mm/f1,4 Article no.: 11092602	Kowa lens 25 mm F 1,4-16 format 1" M.O.D. 0,3 m C-mount
	Obj Kowa LM35HC 35mm/f1,4 Article no.: 11143330	Kowa lens 35 mm F 1,4-16 format 1" M.O.D. 0,3 m C-mount
	Obj Kowa LM50HC 50mm/f1,4 Article no.: 11143331	Kowa lens 50 mm F 1,4-16 format 1" M.O.D. 0,5 m C-mount
	Obj Kowa LM12HC-SW 12,5mm/f1,4 Article no.: 11097919	Kowa lens 12,5 mm F 1,4-16 format 1" locating screw for aperture and focus via RS485 interface M.O.D. 0,9 m C-mount
	Obj Kowa LM25HC-SW 25mm/f1,4 Article no.: 11092603	Kowa lens 25 mm F 1,4-16 format 1" M.O.D. 0,3 m SWIR optimized C-mount
	Obj Kowa LM35HC-SW 35mm/f1,4 Article no.: 11092605	Kowa lens 35 mm F 1,4-16 format 1" M.O.D. 0,4 m SWIR optimized C-mount
	Obj Kowa LM50HC-SW 50mm/f1,4 Article no.: 11087250	Kowa lens 50mm F1,4-16 format 1" M.O.D. 0,6 m SWIR optimized C-mount

Cable

	KSG U2/KSGU6GC0300G Article no.: 11702660	USB 3.0 interface cable screw lock Micro-B connector to type A (optional screw lock) connector, both connectors with die-cast housing length 3.0 m
	KSG U2/KSGU6GC0500G Article no.: 11702816	USB 3.0 interface cable screw lock Micro-B connector to type A (optional screw lock) connector, both connectors with die-cast housing length 5.0 m
	Z-ESG 32FP0500G Shielded cable 8 wires, female connector, 5,0 m Article no.: 11118810	shielded process interface cable M8/8-pin female connector to open wires cable carrier compatible length 5,0 m
	Z-ESW 31FH0500 90° Cable 8 wires, 5,0 m Article no.: 11105262	process interface cable 90° angled M8/8-pin female connector to open wires length 5,0 m alternative article: CAM8.A8-11232605

Mountings and heat sinks

	Mounting Adapter Type D (Front) Article no.: 11165176	mounting adapter for VCXU, VCXG and VCXG.I cameras incl. screw (hexagon socket) stable front side mounting
	Mounting Adapter Type E Article no.: 11165173	camera mounting for cameras of the CX and EX series incl. screws (hexagon socket) stable bottom and tripod mounting
	Heat Sink Type C Article no.: 11165171	heat sink for cameras of the CX and EX series incl. screws (hexagon socket) 50 mm x 64 mm x 20 mm
	Adapter CX- / TX-Mount Article no.: 11165175	mounting adapter for cameras of the CX and EX series to reach mounting dimensions of TX cameras incl. screws (hexagon socket)
	Mounting Adapter Type H Article no.: 11191852	camera mounting adapter for cameras of the CX, LX and QX series incl. screw (hexagon socket) rotatable mounting

To the top

Industrial cameras / CX series

VCXU-32M

USB 3.0, 3,1 Megapixel, Monochrome

No longer available

Technical data

Sensor information

Data quality (EMVA 1288 typical)

Acquisition formats

Image preprocessing

Camera features

Interfaces and connectors

Mechanical data

Electrical data

Non-volatile memory

Environmental conditions

Digital I/Os

Conformity

Software

Software packages

Downloads

Data sheet

Quickstart

Operating Manual

Certificates / approvals

Additional information

Application notes

CAD

Drawings

Dimension drawing

Accessories

Starter Kit

PCIe/Adapter

Housing accessories

Lens accessories

Lens

Cable

Mountings and heat sinks