O300.RR-GD1Z.72CU

Article no.: 11120118

retro-reflective sensor
4 m
pulsed red LED
push-pull
no
cable 4 pin, 2 m
-25 … 60 °C
IP 67

3 pieces immediately available from stock

Technical data

show all

General data

Type

Retro-reflective sensor

Light source

Pulsed red LED

Actual range Sb

Nominal range Sn

Polarization filter

Light indicator

LED yellow

Power on indication

LED green

Sensitivity adjustment

Wave length

630 nm

Suppression of reciprocal influence

Alignment optical axis

< 2°

Electrical data

Response time / release time

< 0.49 ms

Voltage supply range +Vs

10 … 30 VDC

Current consumption max. (no load)

30 mA

Current consumption typ.

30 mA

Voltage drop Vd

<3 VDC

Output function

Dark operate

Output circuit

Push-pull

Output current

100 mA

Short circuit protection

Reverse polarity protection

Mechanical data

Width / diameter

12.9 mm

Height / length

32.3 mm

Depth

23 mm

Design

Rectangular

Housing material

Plastic (ASA, PMMA)

Front (optics)

PMMA

Connection types

Cable 4 pin, 2 m

Ambient conditions

Operating temperature

-25 … +60 °C

Protection class

IP 67

3D-Model

show all

3D-Model

Generating CAD-Models requires an external login to CADENAS.

Downloads

show all

Data sheet

O300.RR-GD1Z.72CU
- DE (pdf | 141 KB)
O300.RR-GD1Z.72CU
- EN (pdf | 139 KB)
O300.RR-GD1Z.72CU
- FR (pdf | 142 KB)
O300.RR-GD1Z.72CU
- ZH (pdf | 319 KB)

Quickstart

Quickstart – O300.RR-GD1Z.72CU
- DE/EN/FR (pdf | 186 KB)

Certificates / approvals

DoC / CoC - O300
- EN/DE/BG/CZ/DK/ES/FI/FR/GR/HU/IT/LT/LV/NL/NO/PL/PT/RO/SK/SI (pdf | 188 KB)

EPLAN

Link to dataportal
- Link to Data Portal

Diagrams

show all

Excess gain curve

The selected altAttribute does not exist!

(png | 214 KB)

(png | 206 KB)

Drawings

show all

Accessories

show all

Reflectors

FTDR 084A084

Reflector rectangular 84 x 84 mm

Article no.: 11101254

Fastening method screw mounting
For Retro-reflective sensors

Peripherals

	ZTEST-ALL.DIGITAL Test unit for sensors digital Article no.: 11084377	LED (red/green) for digital PNP/NPN signals Teach-in of sensors with integrated Teach- button Connection for plug in power supply (available as accessory)
	ZTEST-ALL.ANALOG Test unit for sensors analog & digital Article no.: 11084376	Output via display (V or mA) or LED (PNP/NPN) Teach-in of sensors with integrated Teach- button Connection for plug in power supply (available as accessory)

Mounting accessories

	Sensofix O300/U300 Article no.: 11104963	Clamps made of stainless steel Ball pivots made of galvanized steel Mounting panel made of stainless steel
	Mounting bracket O300/U300 (L design) Article no.: 11102423	Material: Steel
	Mounting bracket O300 - Retrofit for sensors series 20 Article no.: 11124807	Material: Steel
	Mounting rod with mounting plate holder 200 mm Article no.: 11707685	Material: Aluminium Part of an assembly Different lengths available
	Mounting rod with mounting plate holder 300 mm Article no.: 11707686	Material: Aluminium Part of an assembly Different lengths available
	Mounting rod 200 mm Article no.: 11707688	Material: Aluminium Part of an assembly Different lengths available
	Mounting rod 250 mm Article no.: 11707697	Material: Aluminium Part of an assembly Different lengths available
	Mounting rod with mounting plate holder 250 mm Article no.: 11707698	Material: Aluminium Part of an assembly Different lengths available
	Mounting rod 300 mm Article no.: 11707687	Material: Aluminium Part of an assembly Different lengths available
	Mounting plate series 300 and ø12 mm Article no.: 11707701	Material: Steel Part of an assembly
	Mounting base Article no.: 11707702	Material: Plastic (PA) Part of an assembly
	Two-way connector Article no.: 11707703	Material: Plastic (PA) Part of an assembly