O330.RP-GDZZZ.72ZV

Article no.: 11261234

Extended functional reserve capacities for maximum reliability
Baumer PinPoint LED: Small, homogeneous light spot with sharp edges
Fixed preset for the simplest commissioning
Robust housing with brass spacer sleeves

available on request

Technical data

show all

General data

Type

Retro-reflective sensor

Light source

Pulsed PinPoint LED

Actual range Sb

Nominal range Sn

Polarization filter

Alignment / soiled lens indicator

Flashing output indicator

Output indicator

LED yellow

Power on indication

LED green

Wave length

634 nm

Suppression of reciprocal influence

Alignment optical axis

< 1,5°

Electrical data

Response time / release time

< 0.5 ms

Voltage supply range +Vs

10 … 30 VDC

Current consumption max. (no load)

50 mA

Current consumption typ.

25 mA

Voltage drop Vd

<2 VDC

Output function

Dark operate

Output circuit

Push-pull

Output current

100 mA

Short circuit protection

Reverse polarity protection

Mechanical data

Width / diameter

11 mm

Height / length

32 mm

Depth

21 mm

Design

Rectangular

Mechanical mounting

Sleeve smooth (brass)

Housing material

Plastic (ABS, ASA, PMMA)

Front (optics)

PMMA

Connection types

Cable 4 pin, 2 m

Cable characteristics

PVC / PVC 4 x 0.14 mm²

Ambient conditions

Operating temperature

-25 … +55 °C

Protection class

IP 67

Storage temperature

-40 … +70 °C

3D-Model

show all

3D-Model

Generating CAD-Models requires an external login to CADENAS.

Downloads

show all

Data sheet

Data sheet – O330.RP-GDZZZ.72ZV
- ZH (pdf | 756 KB)
Data sheet – O330.RP-GDZZZ.72ZV
- FR (pdf | 700 KB)
Data sheet – O330.RP-GDZZZ.72ZV
- DE (pdf | 708 KB)
Data sheet – O330.RP-GDZZZ.72ZV
- EN (pdf | 701 KB)

Certificates / approvals

DoC / CoC - O330
- EN/DE/BG/CZ/DK/ES/FI/FR/GR/HU/IT/LT/LV/NL/NO/PL/PT/RO/SK/SI (pdf | 180 KB)

EPLAN

Link to dataportal
- Link to Data Portal

Drawings

show all

Drawings

The selected altAttribute does not exist!

(png | 70 KB)

Connection diagram

(png | 82 KB)

Accessories

show all

Reflectors

	FTDR 084A084 Reflector rectangular 84 x 84 mm Article no.: 11101254	Fastening method screw mounting For Retro-reflective sensors
	FTDR 015A038 Reflector rectangular 40 x 18 mm Article no.: 10128191	Fastening method self-adhesive For Retro-reflective sensors
	FTDR 017A027 Reflector rectangular 43 x 20,3 mm Article no.: 10145962	Fastening method screw mounting Micro structure For Retro-reflective sensors
	FTDR 029A046 Reflector rectangular 48 x 32,5 mm Article no.: 10125741	Fastening method self-adhesive For Retro-reflective sensors
	FTDR 047A048 Reflector rectangular 75 x 54 mm Article no.: 10145961	Fastening method screw mounting For Retro-reflective sensors
	FTAR 013A000 Reflector round Ø 15 mm Article no.: 10145963	Fastening method self-adhesive Micro structure For Retro-reflective sensors
	FTAR 019A000 Reflector round Ø 21 mm Article no.: 11107543	Fastening method self-adhesive For Retro-reflective sensors
	FTAR 020A000 Reflector round Ø 25,2 mm Article no.: 10138929	Fastening method self-adhesive Micro structure For Retro-reflective sensors
	FTAR 038A000 Reflector round Ø 46 mm Article no.: 11006499	Fastening method self-adhesive For Retro-reflective sensors
	FTDF 020F020 Reflective tape rectangular 20 x 20 mm Article no.: 10128299	Fastening method self-adhesive For laser light sensors
	Z-FTDF 050K0100 Reflective type rectangular 50 x 100 mm Article no.: 11120355	Fastening method self-adhesive For Retro-reflective sensors

Peripherals

	ZTEST-ALL.DIGITAL Test unit for sensors digital Article no.: 11084377	LED (red/green) for digital PNP/NPN signals Teach-in of sensors with integrated Teach- button Connection for plug in power supply (available as accessory)
	ZTEST-ALL.ANALOG Test unit for sensors analog & digital Article no.: 11084376	Output via display (V or mA) or LED (PNP/NPN) Teach-in of sensors with integrated Teach- button Connection for plug in power supply (available as accessory)

Mounting accessories

	Sensofix O300/U300 Article no.: 11104963	Clamps made of stainless steel Ball pivots made of galvanized steel Mounting panel made of stainless steel
	Mounting bracket O300/U300 (L design) Article no.: 11102423	Material: Steel
	Mounting bracket O300 - Retrofit for sensors series 20 Article no.: 11124807	Material: Steel
	Mounting rod with mounting plate holder 200 mm Article no.: 11707685	Material: Aluminium Part of an assembly Different lengths available
	Mounting rod with mounting plate holder 300 mm Article no.: 11707686	Material: Aluminium Part of an assembly Different lengths available
	Mounting rod 200 mm Article no.: 11707688	Material: Aluminium Part of an assembly Different lengths available
	Mounting rod 250 mm Article no.: 11707697	Material: Aluminium Part of an assembly Different lengths available
	Mounting rod with mounting plate holder 250 mm Article no.: 11707698	Material: Aluminium Part of an assembly Different lengths available
	Mounting rod 300 mm Article no.: 11707687	Material: Aluminium Part of an assembly Different lengths available
	Mounting plate series 300 and ø12 mm Article no.: 11707701	Material: Steel Part of an assembly
	Mounting base Article no.: 11707702	Material: Plastic (PA) Part of an assembly
	Two-way connector Article no.: 11707703	Material: Plastic (PA) Part of an assembly