optoPulse EIL580-SC

Size ø58 mm
Precise optical sensing
Output signal level TTL or HTL
Clamping flange
Connection axial, radial or tangential
Pulses per revolution up to 5000
High protection up to IP 67
High resistance to shock and vibrations

disponibilità su richiesta

Dati tecnici

mostra tutti

Dati tecnici - Valori elettrici

Tensione operativa

5 VDC ±5 %
8...30 VDC
4.75...30 VDC

Reverse polarity protection

Short-circuit proof

Yes (HTL)
Yes (TTL, max. 1 s and 1 signal)

Corrente operativa senza carico

≤70 mA

Impulsi per giro

100 … 5000

Sfasamento

90 ° ±10°

Rapporto ciclico

40…60 %

Segnale di riferimento

Zero pulse, width 90° ±10 %

Principio di scansione

Ottico

Frequenza di uscita

≤300 kHz (TTL)
≤160 kHz (HTL)

Segnale di uscita

A+, B+, R+, A-, B-, R-

Livelli di uscita

TTL/RS422
HTL/push-pull

Immunità alle interferenze

EN 61000-6-2

Emissione di interferenze

EN 61000-6-3

Approvazione

UL 508 / CSA 22.2

Dati tecnici - progettazione meccanica

Grandezza (flangia)

ø58 mm

Tipo di albero

ø10 x 20 mm, solid shaft with flat
ø3/8" x 4/5" (ø9.525 x 20.32 mm), solid shaft with flat

Carico dell‘albero massimo ammesso

≤40 N assiale
≤80 N radiale

Flangia

Clamping flange

Classe di protezione EN 60529

IP 65 (without shaft seal)
IP 67 (with shaft seal)

Velocità operativa

≤6000 rpm (+20 °C, IP 67)
≤12000 rpm (+20 °C, IP 65)

Coppia di spunto

≤0,015 Nm (+20 °C, IP 65)
≤0,02 Nm (+20 °C, IP 67)

Materiale

Alloggiamento: lega pressofusa di alluminio
Flange: aluminium
Albero: acciaio inox

Temperatura operativa

-40...+85 °C

Relative humidity

90 % non-condensing

Resistenza

EN 60068-2-6
Vibrazione 30 g, 10-2000 Hz
EN 60068-2-27
Urti 300 g, 6 ms

Allacciamento

Flange connector M12, 8-pin
Flange connector M23, 12-pin
Cavo

Peso ca.

300 g

Scaricare

mostra tutti

Data sheet

Schede tecniche – EIL580-SC
- FR (pdf | 2 MB)
Schede tecniche – EIL580-SC
- DE (pdf | 2 MB)
Schede tecniche – EIL580-SC
- EN (pdf | 2 MB)
Schede tecniche – EIL580-SC
- ZH (pdf | 1 MB)

Quickstart

EIL580
- DE/EN/FR/IT/ES (pdf | 1 MB)

Certificates / approvals

UL certificate E240061
- EN (pdf | 167 KB)

Brochures / Catalogs

Declaration of conformity

DoC / CoC - EIL580, ITD2LH00
- BG/CZ/DE/DK/EN/ES/FI/FR/GR/HU/KO/LT/LV/NL/NO/PL/PT/RO/SI/SK (pdf | 389 KB)

CAD

EIL580: Clamping flange (centering collar ø36 mm), solid shaft ø10 mm, cable axial, IP65 / STEP (EIL580-SC10.5Tx.xxxxx.A)
- STEP (zip | 1 MB)
EIL580: Clamping flange (centering collar ø36 mm), solid shaft ø10 mm, cable axial, IP67 / STEP (EIL580-SC10.7Tx.xxxxx.A)
- STEP (zip | 1 MB)
EIL580: Clamping flange (centering collar ø36 mm), solid shaft ø10 mm, cable radial, IP65 / STEP (EIL580-SC10.5Rx.xxxxx.A)
- STEP (zip | 1 MB)
EIL580: Clamping flange (centering collar ø36 mm), solid shaft ø10 mm, cable radial, IP67 / STEP (EIL580-SC10.7Rx.xxxxx.A)
- STEP (zip | 1 MB)
EIL580: Clamping flange (centering collar ø36 mm), solid shaft ø10 mm, cable tangential, IP65 / STEP (EIL580-SC10.5Px.xxxxx.A)
- STEP (zip | 1 MB)
EIL580: Clamping flange (centering collar ø36 mm), solid shaft ø10 mm, cable tangential, IP67 / STEP (EIL580-SC10.7Px.xxxxx.A)
- STEP (zip | 1 MB)
EIL580: Clamping flange (centering collar ø36 mm), solid shaft ø10 mm, connector M12 axial, IP65 / STEP (EIL580-SC10.5Ax.xxxxx.A)
- STEP (zip | 956 KB)
EIL580: Clamping flange (centering collar ø36 mm), solid shaft ø10 mm, connector M12 axial, IP67 / STEP (EIL580-SC10.7Ax.xxxxx.A)
- STEP (zip | 3 MB)
EIL580: Clamping flange (centering collar ø36 mm), solid shaft ø10 mm, connector M12 radial, IP65 / STEP (EIL580-SC10.5Bx.xxxxx.A)
- STEP (zip | 952 KB)
EIL580: Clamping flange (centering collar ø36 mm), solid shaft ø10 mm, connector M12 radial, IP67 / STEP (EIL580-SC10.7Bx.xxxxx.A)
- STEP (zip | 956 KB)
EIL580: Clamping flange (centering collar ø36 mm), solid shaft ø10 mm, connector M23 axial, IP65 / STEP (EIL580-SC10.5Dx.xxxxx.A)
- STEP (zip | 495 KB)
EIL580: Clamping flange (centering collar ø36 mm), solid shaft ø10 mm, connector M23 axial, IP67 / STEP (EIL580-SC10.7Dx.xxxxx.A)
- STEP (zip | 502 KB)
EIL580: Clamping flange (centering collar ø36 mm), solid shaft ø10 mm, connector M23 radial, IP65 / STEP (EIL580-SC10.5Fx.xxxxx.A)
- STEP (zip | 1 MB)
EIL580: Clamping flange (centering collar ø36 mm), solid shaft ø10 mm, connector M23 radial, IP67 / STEP (EIL580-SC10.7Fx.xxxxx.A)
- STEP (zip | 1 MB)

Disegni

mostra tutti

Drawings

The selected altAttribute does not exist!

(png | 55 KB)

(png | 60 KB)

(png | 55 KB)

(png | 61 KB)

(png | 59 KB)

(png | 63 KB)

Accessori

mostra tutti

Accessori di montaggio

	Coupling CPS25 (L=19, D1=04 / D2=10) For encoder with solid shaft Articolo n..: 11065915	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Coupling CPS25 (L=19, D1=07 / D2=10) For encoder with solid shaft Articolo n..: 11065918	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Coupling CPS25 (L=19, D1=08 / D2=10) For encoder with solid shaft Articolo n..: 11065920	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Coupling CPS25 (L=19, D1=09 / D2=10) For encoder with solid shaft Articolo n..: 11065921	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Coupling CPS25 (L=19, D1=10 / D2=06) For encoder with solid shaft Articolo n..: 11065922	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Coupling CPS25 (L=19, D1=10 / D2=10) For encoder with solid shaft Articolo n..: 11065923	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Coupling CPS25 (L=19, D1=10 / D2=11) For encoder with solid shaft Articolo n..: 11065924	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Coupling CPS25 (L=19, D1=10 / D2=12) For encoder with solid shaft Articolo n..: 11065925	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Spring washer coupling (D1=6 / D2=10) For encoder with solid shaft Articolo n..: 10141132	Backlash-free and angle-synchronous transmission of rotary movements Plug-in version Electric isolated Suitable for very high speeds Good compensation of all misalignments
	Spring washer coupling (D1=10 / D2=10) For encoder with solid shaft Articolo n..: 10141133	Backlash-free and angle-synchronous transmission of rotary movements Plug-in version Electric isolated Suitable for very high speeds Good compensation of all misalignments
	Spring washer coupling (D1=10 / D2=16) For encoder with solid shaft Articolo n..: 11034138	Backlash-free and angle-synchronous transmission of rotary movements Plug-in version Electric isolated Suitable for very high speeds Good compensation of all misalignments
	Spring washer coupling (D1=10 / D2=14) For encoder with solid shaft Articolo n..: 11034140	Backlash-free and angle-synchronous transmission of rotary movements Plug-in version Electric isolated Suitable for very high speeds Good compensation of all misalignments
	Spring washer coupling (D1=10 / D2=12) For encoder with solid shaft Articolo n..: 11034141	Backlash-free and angle-synchronous transmission of rotary movements Plug-in version Electric isolated Suitable for very high speeds Good compensation of all misalignments
	Bellows coupling (D1=06 / D2=10) For encoder with solid shaft Articolo n..: 11050507	Backlash-free angle-synchronous transmission Optimum compensation of misalignments Very high torsional spring stiffness Small restoring force Vibration damping Stainless steel bellows
	Double loops coupling (D1=10 / D2=10) For encoder with solid shaft Articolo n..: 11101781	Thermally and electrically isolated Absorbing shocks and vibration Excellent compensation of radial, lateral and angular misalignments Medium torsional stiffness Low restoring forces Maintenance-free
	Mounting adaptor For encoders with clamping flange Articolo n..: 10125051	Glass-fiber reinforced plastic Excellent resistance against temperature and chemicals Electrically isolated encoder mount
	Set of eccentric fixings type A Articolo n..: 11065545	With 3 eccentric fixings type A
	Spring encoder arm Articolo n..: 11101893	Tether arm for Ø58 mm with clamping flange Optimal for use encoders with measuring wheel Virtually any contact pressure adjustable Versatile mounting options

Connettori e cavi

	Connection cable 5 m shielded with female connector M12, 8-pin, straight (ESG 34FH0500G) Articolo n..: 10129332	Connection cable shielded with female connector M12, shielding on cap nut Cable length 5 m 8-pin version Cable coating PUR Halogen-free Suitable for flexible cable carriers UL listed, number E315836
	Connection cable 10 m shielded with female connector M12, 8-pin, straight (ESG 34FH1000G) Articolo n..: 10129333	Connection cable shielded with female connector M12, shielding on cap nut Cable length 10 m 8-pin version Cable coating PUR Halogen-free Suitable for flexible cable carriers UL listed, number E315836
	Connection cable 2 m shielded with female connector M12, 8-pin, angled (ESW 33FH0200G) Articolo n..: 11053961	Connection cable shielded with female connector M12, shielding on cap nut Cable length 2 m 8-pin version Cable coating PUR Halogen-free Suitable for flexible cable carriers UL listed, number E315836
	Connection cable 5 m shielded with female connector M12, 8-pin, angled (ESW 33FH0500G) Articolo n..: 11053962	Connection cable shielded with female connector M12, shielding on cap nut Cable length 5 m 8-pin version Cable coating PUR Halogen-free Suitable for flexible cable carriers UL listed, number E315836
	Connection cable 10 m shielded with female connector M12, 8-pin, angled (ESW 33FH1000G) Articolo n..: 10170054	Connection cable shielded with female connector M12, shielding on cap nut Cable length 10 m 8-pin version Cable coating PUR Halogen-free Suitable for flexible cable carriers UL listed, number E315836
	Female connector M23, 12-pin, CW Articolo n..: 10164705	Connector M23: 12-pin, female, clockwise (CW). Suitable for cable connection to flange connector M23 (12-pin, male, counter-clockwise (CCW)). EMC version Temperature range -40...+100 °C
	Female connector M23, 12-pin, CW, with cable 1 m Articolo n..: 11095302	Connection cable shielded with female connector M23, open cable end Cable [4x2x0.14 mm²], cable length 1 m Cable coating PVC Colour code according to DIN 47100 UL/CSA approval Connector M23: 12-pin, female, clockwise (CW). Suitable for cable connection to flange connector M23 (12-pin, male, counter-clockwise (CCW)). Temperature range -40...+85 °C (fixed installation)
	Female connector M23, 12-pin, CW, with cable 2 m Articolo n..: 11100408	Connection cable shielded with female connector M23, open cable end Cable [4x2x0.14 mm²], cable length 2 m Cable coating PVC Colour code according to DIN 47100 UL/CSA approval Connector M23: 12-pin, female, clockwise (CW). Suitable for cable connection to flange connector M23 (12-pin, male, counter-clockwise (CCW)). Temperature range -40...+85 °C (fixed installation)
	Female connector M23, 12-pin, CW, with cable 5 m Articolo n..: 11100430	Connection cable shielded with female connector M23, open cable end Cable [4x2x0.14 mm²], cable length 5 m Cable coating PVC Colour code according to DIN 47100 UL/CSA approval Connector M23: 12-pin, female, clockwise (CW). Suitable for cable connection to flange connector M23 (12-pin, male, counter-clockwise (CCW)). Temperature range -40...+85 °C (fixed installation)
	Female connector M23, 12-pin, CW, with cable 10 m Articolo n..: 11100431	Connection cable shielded with female connector M23, open cable end Cable [4x2x0.14 mm²], cable length 10 m Cable coating PVC Colour code according to DIN 47100 UL/CSA approval Connector M23: 12-pin, female, clockwise (CW). Suitable for cable connection to flange connector M23 (12-pin, male, counter-clockwise (CCW)). Temperature range -40...+85 °C (fixed installation)