HMG10-T - SSI | Encoder assoluti

Magnetic sensing method
Function display via LEDs
Multiturn sensing with Energy Harvesting technology "MicroGen", without gear or battery
Two-sided bearing system with hybrid bearings
Special protection against corrosion CX (C5-M)

disponibilità su richiesta

Dati tecnici

mostra tutti

Dati tecnici - Valori elettrici

Tensione operativa

4.75...30 VDC

Short-circuit proof

Corrente operativa senza carico

≤100 mA (SSI)

Initializing time

≤ 500 ms after power on

Interface

Function

Multiturn

Steps per revolution

1048576 / 20 bit

Number of revolutions

1048576 / 20 bit

Additional outputs

Square-wave TTL/HTL,TTL/RS422

Principio di scansione

Magnetic

Code

Gray or binary

Code sequence

CW (factory setting)

Input signals

SSI clock, PRESET, rotating direction

Immunità alle interferenze

EN 61000-6-2

Emissione di interferenze

EN 61000-6-3

Diagnostic function

Function control

Status indicator

4 LEDs in device back side

Approvazione

CE
UL approval / E217823

Dati tecnici - Valori nominali elettrici (variatori di velocità)

Switching accuracy

± 2 % (or 1 Digit)

Switching outputs

1 output (Open collector, solid state relay on request)

Output switching capacity

30 VDC; ≤100 mA

Switching delay time

≤20 ms

Dati tecnici - progettazione meccanica

Grandezza (flangia)

ø105 mm

Tipo di albero

ø16...20 mm (through hollow shaft)

Flangia

Support plate, 360° freely positionable

Classe di protezione EN 60529

IP 66 / IP 67

Velocità operativa

≤12000 rpm

Range of switching speed

ns (off) = ±2...12000 rpm

Tip. coppia operativa

10 Ncm

Rotore momento d‘inerzia

950 gcm²

Carico dell‘albero massimo ammesso

≤450 N assiale
≤650 N radiale

Materiale

Housing: aluminium alloy
Albero: acciaio inox

Corrosion protection

IEC 60068-2-52 Salt mist
for ambient conditions CX (C5-M) according to ISO 12944-2

Temperatura operativa

-40...+95 °C

Relative humidity

95 % non-condensing

Resistenza

IEC 60068-2-6
Vibrazione 30 g, 10-2000 Hz
IEC 60068-2-27
Urti 400 g, 1 ms

Peso ca.

1,6 kg (depending on version)

Allacciamento

Terminal box
Flange connector M23

Scaricare

mostra tutti

Data sheet

Schede tecniche – HMG10-T - SSI
- ZH (pdf | 1 MB)
Schede tecniche – HMG10-T - SSI
- FR (pdf | 1 MB)
Schede tecniche – HMG10-T - SSI
- DE (pdf | 1 MB)
Schede tecniche – HMG10-T - SSI
- EN (pdf | 1 MB)

Accessori

mostra tutti

Accessori di montaggio

	Torque arm M6, length 67...70 mm Articolo n..: 11043628	Torque arm for hollow shaft encoder Swivel joints size M6 according to DIN ISO 12240-4, size series K Compensate for mounting tolerances of the drive shaft in an axial direction Standard version Length 67...70 mm
	Torque arm M6, length 425...460 mm (≥131 mm) Articolo n..: 11002915	Torque arm for hollow shaft encoder Swivel joints size M6 according to DIN ISO 12240-4, size series K Compensate for mounting tolerances of the drive shaft in an axial direction Standard version Length 425...460 mm Can be shortened to ≥131 mm
	Torque arm M6 insulated, length 67...70 mm Articolo n..: 11054917	Torque arm for hollow shaft encoder Swivel joints size M6 according to DIN ISO 12240-4, size series K Compensate for mounting tolerances of the drive shaft in an axial direction Insulated version Length 67...70 mm
	Torque arm M6 insulated, length 120...130 mm (≥71 mm) Articolo n..: 11072795	Torque arm for hollow shaft encoder Swivel joints size M6 according to DIN ISO 12240-4, size series K Compensate for mounting tolerances of the drive shaft in an axial direction Insulated version Length 120...130 mm Can be shortened to ≥71 mm
	Torque arm M6 insulated, length 425...460 mm (≥131 mm) Articolo n..: 11082677	Torque arm for hollow shaft encoder Swivel joints size M6 according to DIN ISO 12240-4, size series K Compensate for mounting tolerances of the drive shaft in an axial direction Insulated version Length 425...460 mm Can be shortened to ≥131 mm
	Mounting kit for torque arm size M6 and earthing strap Articolo n..: 11077197	Mounting kit for fixing a torque arm size M6 and an earthing strap.

Connettori e cavi

	Sensor cable for encoders HEK 8	The sensor cable HEK 8 is a proven industrial product designed to match high demands. It is halogen free and its rugged outer construction allows it to be pulled and dragged in free conditions. It is certified to UL 20233. The cable can be supplied in any length and pre-fitted with various connectors.
	Sensor cable for encoders HEK 17	The sensor cable HEK 17 is a proven industrial product designed to match high demands. It is halogen free, oil-resistant, abrasion and notch-resistant and its rugged outer construction allows it to be pulled and dragged in free conditions. It is certified to UL AWM Style 20236, CSA AWM IA/B; IIA/B FT 1, UL File No. E63634. The cable can be supplied in any length and pre-fitted with various connectors.
	Mating connector M23, solder version, 12-pin, CCW Articolo n..: 11068577	Mating connector M23 in solder version (12-pin, female, CCW) for cable connection to the flange connector M23 (12-pin, male, CW).
	Mating connector M23, solder version, 17-pin, CCW Articolo n..: 11068551	Mating connector M23 in solder version (17-pin, female , CCW) for cable connection to the flange connector M23 (17-pin, male , CW).
	Mating connector M23 (11 pins assigned) 17-pin, CCW with sensor cable HEK 17, length 1 m Articolo n..: 11172482	Mating connector M23 (17-pin, 11 pins assigned, female, CCW) for cable connection to the flange connector M23 (17-pin, male, CW) with connected sensor cable HEK 17, lenght 1 m. The sensor cable HEK 17 is a proven industrial product designed to match high demands. It is halogen free, oil-resistant, abrasion and notch-resistant and its rugged outer construction allows it to be pulled and dragged in free conditions. It is certified to UL AWM Style 20236, CSA AWM IA/B; IIA/B FT 1, UL File No. E63634.
	Mating connector M23 (11 pins assigned) 17-pin, CCW with sensor cable HEK 17, length 5 m Articolo n..: 11172499	Mating connector M23 (17-pin, 11 pins assigned, female, CCW) for cable connection to the flange connector M23 (17-pin, male, CW) with connected sensor cable HEK 17, length 5 m. The sensor cable HEK 17 is a proven industrial product designed to match high demands. It is halogen free, oil-resistant, abrasion and notch-resistant and its rugged outer construction allows it to be pulled and dragged in free conditions. It is certified to UL AWM Style 20236, CSA AWM IA/B; IIA/B FT 1, UL File No. E63634.
	Mating connector M23 (11 pins assigned) 17-pin, CCW with sensor cable HEK 17, length 10 m Articolo n..: 11172580	Mating connector M23 (17-pin, 11 pins assigned, female, CCW) for cable connection to the flange connector M23 (17-pin, male, CW) with connected sensor cable HEK 17, length 10 m. The sensor cable HEK 17 is a proven industrial product designed to match high demands. It is halogen free, oil-resistant, abrasion and notch-resistant and its rugged outer construction allows it to be pulled and dragged in free conditions. It is certified to UL AWM Style 20236, CSA AWM IA/B; IIA/B FT 1, UL File No. E63634.
	Mating connector M23 (17 pins assigned) 17-pin, CCW with sensor cable HEK 17, length 3 m Articolo n..: 11172463	Mating connector M23 (17-pin, 17 pins assigned, female, CCW) for cable connection to the flange connector M23 (17-pin, male, CW) with connected sensor cable HEK 17, length 3 m. The sensor cable HEK 17 is a proven industrial product designed to match high demands. It is halogen free, oil-resistant, abrasion and notch-resistant and its rugged outer construction allows it to be pulled and dragged in free conditions. It is certified to UL AWM Style 20236, CSA AWM IA/B; IIA/B FT 1, UL File No. E63634.