optoPulse ExEIL580P-SC

Size ø58 mm
Precise optical sensing (interpolated)
Output signal level programmable (TTL or HTL)
Clamping flange
Connection axial, radial or tangential
Pulses per revolution 1...65536, programmable
High resistance to shock and vibrations
Option 0122, Explosion protection zone 22

Technical data

show all

Technical data - electrical ratings

Voltage supply

4.75...30 VDC

Reverse polarity protection

Short-circuit proof

Consumption w/o load

≤70 mA

Initializing time

≤ 30 ms after power on

Pulses per revolution

1 … 65536

Duty cycle

45…55 % typical at 1024, 2048 ppr (further see table Duty cycle)

Reference signal

Zero pulse 90° or 180°

Sensing method

Optical

Output frequency

≤300 kHz (TTL)
≤160 kHz (HTL)

Output signals

A+, B+, R+, A-, B-, R-

Output stages

TTL/RS422
HTL/push-pull

Programmable parameters

Output level TTL/HTL
Pulse number 1...65536
Zero pulse width 90°/180°
Zero pulse position
Signal sequence

Interference immunity

EN 61000-6-2

Emitted interference

EN 61000-6-3

Technical data - mechanical design

Size (flange)

ø58 mm

Shaft type

ø10 x 20 mm, solid shaft with flat

Admitted shaft load

≤40 N axial
≤80 N radial

Flange

Clamping flange

Protection EN 60529

IP 65

Operating speed

≤12000 rpm (+20 °C)
≤11000 rpm (+40 °C)
≤8000 rpm (+60 °C)

Starting torque

≤0.015 Nm (+20 °C)

Material

Housing: aluminium die-cast
Flange: aluminium
Solid shaft: stainless steel

Ambient temperature

-20...+60 °C

Relative humidity

90 % non-condensing

Resistance

EN 60068-2-6
Vibration 30 g, 10-2000 Hz
EN 60068-2-27
Shock 300 g, 6 ms

Explosion protection

II 3 D Ex tc IIIC T135°C Dc X (dust): see special conditions “X”

Connection

Flange connector M12, 8-pin
Flange connector M23, 12-pin
Cable

Weight approx.

300 g

Software

show all

Software

Encoder Software v3.3 05.07.16
- (zip | 6 MB)

Downloads

show all

Data sheet

Data sheet – ExEIL580P-SC
- FR (pdf | 2 MB)
Data sheet – ExEIL580P-SC
- DE (pdf | 2 MB)
Data sheet – ExEIL580P-SC
- EN (pdf | 2 MB)
Data sheet – ExEIL580P-SC
- ZH (pdf | 2 MB)

Quickstart

ExEIL580P
- DE/EN (pdf | 1 MB)

Brochures / Catalogs

EIL580P Programmable
- DE (pdf | 928 KB)
EIL580P Programmable
- EN (pdf | 927 KB)
EIL580P Programmable
- FR (pdf | 929 KB)

Declaration of conformity

DoC / CoC - ExEIL580
- DE/EN/FR/BG/CZ/DK/ES/FI/GR/HU/IT/LT/LV/NL/NO/PL/PT/RO/SI/SK (pdf | 488 KB)

CAD

EIL580: Clamping flange (centering collar ø36 mm), solid shaft ø10 mm, cable axial, IP65 / STEP (EIL580-SC10.5Tx.xxxxx.A)
- (zip | 1 MB)
EIL580: Clamping flange (centering collar ø36 mm), solid shaft ø10 mm, cable radial, IP65 / STEP (EIL580-SC10.5Rx.xxxxx.A)
- (zip | 1 MB)
EIL580: Clamping flange (centering collar ø36 mm), solid shaft ø10 mm, cable tangential, IP65 / STEP (EIL580-SC10.5Px.xxxxx.A)
- (zip | 1 MB)
EIL580: Clamping flange (centering collar ø36 mm), solid shaft ø10 mm, connector M12 axial, IP65 / STEP (EIL580-SC10.5Ax.xxxxx.A)
- (zip | 956 KB)
EIL580: Clamping flange (centering collar ø36 mm), solid shaft ø10 mm, connector M12 radial, IP65 / STEP (EIL580-SC10.5Bx.xxxxx.A)
- (zip | 952 KB)
EIL580: Clamping flange (centering collar ø36 mm), solid shaft ø10 mm, connector M23 axial, IP65 / STEP (EIL580-SC10.5Dx.xxxxx.A)
- (zip | 495 KB)
EIL580: Clamping flange (centering collar ø36 mm), solid shaft ø10 mm, connector M23 radial, IP65 / STEP (EIL580-SC10.5Fx.xxxxx.A)
- (zip | 1 MB)

Accessories

show all

Mounting accessories

	Coupling CPS25 (L=19, D1=04 / D2=10) For encoder with solid shaft Article no.: 11065915	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Coupling CPS25 (L=19, D1=07 / D2=10) For encoder with solid shaft Article no.: 11065918	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Coupling CPS25 (L=19, D1=08 / D2=10) For encoder with solid shaft Article no.: 11065920	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Coupling CPS25 (L=19, D1=09 / D2=10) For encoder with solid shaft Article no.: 11065921	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Coupling CPS25 (L=19, D1=10 / D2=06) For encoder with solid shaft Article no.: 11065922	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Coupling CPS25 (L=19, D1=10 / D2=10) For encoder with solid shaft Article no.: 11065923	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Coupling CPS25 (L=19, D1=10 / D2=11) For encoder with solid shaft Article no.: 11065924	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Coupling CPS25 (L=19, D1=10 / D2=12) For encoder with solid shaft Article no.: 11065925	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Spring washer coupling (D1=6 / D2=10) For encoder with solid shaft Article no.: 10141132	Backlash-free and angle-synchronous transmission of rotary movements Plug-in version Electric isolated Suitable for very high speeds Good compensation of all misalignments
	Spring washer coupling (D1=10 / D2=10) For encoder with solid shaft Article no.: 10141133	Backlash-free and angle-synchronous transmission of rotary movements Plug-in version Electric isolated Suitable for very high speeds Good compensation of all misalignments
	Spring washer coupling (D1=10 / D2=16) For encoder with solid shaft Article no.: 11034138	Backlash-free and angle-synchronous transmission of rotary movements Plug-in version Electric isolated Suitable for very high speeds Good compensation of all misalignments
	Spring washer coupling (D1=10 / D2=14) For encoder with solid shaft Article no.: 11034140	Backlash-free and angle-synchronous transmission of rotary movements Plug-in version Electric isolated Suitable for very high speeds Good compensation of all misalignments
	Spring washer coupling (D1=10 / D2=12) For encoder with solid shaft Article no.: 11034141	Backlash-free and angle-synchronous transmission of rotary movements Plug-in version Electric isolated Suitable for very high speeds Good compensation of all misalignments
	Bellows coupling (D1=06 / D2=10) For encoder with solid shaft Article no.: 11050507	Backlash-free angle-synchronous transmission Optimum compensation of misalignments Very high torsional spring stiffness Small restoring force Vibration damping Stainless steel bellows
	Double loops coupling (D1=10 / D2=10) For encoder with solid shaft Article no.: 11101781	Thermally and electrically isolated Absorbing shocks and vibration Excellent compensation of radial, lateral and angular misalignments Medium torsional stiffness Low restoring forces Maintenance-free
	Mounting adaptor For encoders with clamping flange Article no.: 10125051	Glass-fiber reinforced plastic Excellent resistance against temperature and chemicals Electrically isolated encoder mount
	Set of eccentric fixings type A Article no.: 11065545	With 3 eccentric fixings type A
	Spring encoder arm Article no.: 11101893	Tether arm for Ø58 mm with clamping flange Optimal for use encoders with measuring wheel Virtually any contact pressure adjustable Versatile mounting options

Connectors and cables

The selected altAttribute does not exist!

Female connector M23 with pin lock, 12-pin, CW

Article no.: 11141051

Connector M23: 12-pin, female, clockwise (CW). Suitable for cable connection to flange connector M23 (12-pin, male, counter-clockwise (CCW)).
Knurled nut with pin lock
EMC version
Temperature range -40...+100 °C

Programming accessories

	Handheld Programming Tool Z-PA-EI-H Article no.: 11120657	Battery operated stand-alone solution Intuitive, fully menu-driven programming Four user-assigned buttons for simple and quick programming Memory of several encoder configurations Backlit display LED status indicator Encoder diagnostic functions
	PC Programming Tool Z-PA-EI-P For programmable encoders EIL580P, HS35P, ITD2PH00.2 Article no.: 11120547	PC Programming Tool incl. Encoder Software Easy and intuitive operation Memory of several encoder configurations Encoder diagnostics with monitor output USB powered Product documentation by printing customized product labels
	Connection cable connector M12 / connector D-SUB, 0.2 m Article no.: 11119280	Connecting cable shielded with connector M12, 8-pin, female contacts on connector D-SUB, 9-pin, male contacts
	Connection cable connector M12 / connector D-SUB, 1 m Article no.: 11119720	Connecting cable shielded with connector M12, 8-pin, female contacts on connector D-SUB, 9-pin, male contacts
	Connection cable connector M23 (CW) / connector D-SUB, 0.2 m Article no.: 11119257	Connecting cable shielded with connector M23, 12-pin, female contacts, clockwise (CW) on connector D-SUB, 9-pin, male contacts
	Connection cable connector M23 (CW) / connector D-SUB, 1 m Article no.: 11119723	Connecting cable shielded with connector M23, 12-pin, female contacts, clockwise (CW) on connector D-SUB, 9-pin, male contacts