optoPulse ExEIL580-SC

Size ø58 mm
Precise optical sensing
Output signal level TTL or HTL
Clamping flange
Connection axial, radial or tangential
Pulses per revolution up to 5000
High resistance to shock and vibrations
Option 0122, Explosion protection zone 22

available on request

Technical data

show all

Technical data - electrical ratings

Voltage supply

5 VDC ±5 %
8...30 VDC
4.75...30 VDC

Reverse polarity protection

Short-circuit proof

Yes (HTL)
Yes (TTL, max. 1 s and 1 signal)

Consumption w/o load

≤70 mA

Pulses per revolution

100 … 5000

Phase shift

90 ° ±10°

Duty cycle

40…60 %

Reference signal

Zero pulse, width 90° ±10 %

Sensing method

Optical

Output frequency

≤300 kHz (TTL)
≤160 kHz (HTL)

Output signals

A+, B+, R+, A-, B-, R-

Output stages

TTL/RS422
HTL/push-pull

Interference immunity

EN 61000-6-2

Emitted interference

EN 61000-6-3

Technical data - mechanical design

Size (flange)

ø58 mm

Shaft type

ø10 x 20 mm, solid shaft with flat

Admitted shaft load

≤40 N axial
≤80 N radial

Flange

Clamping flange

Protection EN 60529

IP 65

Operating speed

≤12000 rpm (+20 °C)
≤11000 rpm (+40 °C)
≤8000 rpm (+60 °C)

Starting torque

≤0.015 Nm (+20 °C)

Material

Housing: aluminium die-cast
Flange: aluminium
Solid shaft: stainless steel

Ambient temperature

-20...+60 °C

Relative humidity

90 % non-condensing

Resistance

EN 60068-2-6
Vibration 30 g, 10-2000 Hz
EN 60068-2-27
Shock 300 g, 6 ms

Explosion protection

II 3 D Ex tc IIIC T135°C Dc X (dust): see special conditions “X”

Connection

Flange connector M12, 8-pin
Flange connector M23, 12-pin
Cable

Weight approx.

300 g

Downloads

show all

Data sheet

Data sheet – ExEIL580-SC
- FR (pdf | 2 MB)
Data sheet – ExEIL580-SC
- DE (pdf | 2 MB)
Data sheet – ExEIL580-SC
- EN (pdf | 2 MB)
Data sheet – ExEIL580-SC
- ZH (pdf | 1 MB)

Quickstart

ExEIL580
- DE/EN (pdf | 1 MB)

Brochures / Catalogs

Declaration of conformity

DoC / CoC - ExEIL580
- DE/EN/FR/BG/CZ/DK/ES/FI/GR/HU/IT/LT/LV/NL/NO/PL/PT/RO/SI/SK (pdf | 488 KB)

CAD

EIL580: Clamping flange (centering collar ø36 mm), solid shaft ø10 mm, cable axial, IP65 / STEP (EIL580-SC10.5Tx.xxxxx.A)
- (zip | 1 MB)
EIL580: Clamping flange (centering collar ø36 mm), solid shaft ø10 mm, cable radial, IP65 / STEP (EIL580-SC10.5Rx.xxxxx.A)
- (zip | 1 MB)
EIL580: Clamping flange (centering collar ø36 mm), solid shaft ø10 mm, cable tangential, IP65 / STEP (EIL580-SC10.5Px.xxxxx.A)
- (zip | 1 MB)
EIL580: Clamping flange (centering collar ø36 mm), solid shaft ø10 mm, connector M12 axial, IP65 / STEP (EIL580-SC10.5Ax.xxxxx.A)
- (zip | 956 KB)
EIL580: Clamping flange (centering collar ø36 mm), solid shaft ø10 mm, connector M12 radial, IP65 / STEP (EIL580-SC10.5Bx.xxxxx.A)
- (zip | 952 KB)
EIL580: Clamping flange (centering collar ø36 mm), solid shaft ø10 mm, connector M23 axial, IP65 / STEP (EIL580-SC10.5Dx.xxxxx.A)
- (zip | 495 KB)
EIL580: Clamping flange (centering collar ø36 mm), solid shaft ø10 mm, connector M23 radial, IP65 / STEP (EIL580-SC10.5Fx.xxxxx.A)
- (zip | 1 MB)

Accessories

show all

Mounting accessories

	Coupling CPS25 (L=19, D1=04 / D2=10) For encoder with solid shaft Article no.: 11065915	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Coupling CPS25 (L=19, D1=07 / D2=10) For encoder with solid shaft Article no.: 11065918	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Coupling CPS25 (L=19, D1=08 / D2=10) For encoder with solid shaft Article no.: 11065920	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Coupling CPS25 (L=19, D1=09 / D2=10) For encoder with solid shaft Article no.: 11065921	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Coupling CPS25 (L=19, D1=10 / D2=06) For encoder with solid shaft Article no.: 11065922	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Coupling CPS25 (L=19, D1=10 / D2=10) For encoder with solid shaft Article no.: 11065923	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Coupling CPS25 (L=19, D1=10 / D2=11) For encoder with solid shaft Article no.: 11065924	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Coupling CPS25 (L=19, D1=10 / D2=12) For encoder with solid shaft Article no.: 11065925	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Spring washer coupling (D1=6 / D2=10) For encoder with solid shaft Article no.: 10141132	Backlash-free and angle-synchronous transmission of rotary movements Plug-in version Electric isolated Suitable for very high speeds Good compensation of all misalignments
	Spring washer coupling (D1=10 / D2=10) For encoder with solid shaft Article no.: 10141133	Backlash-free and angle-synchronous transmission of rotary movements Plug-in version Electric isolated Suitable for very high speeds Good compensation of all misalignments
	Spring washer coupling (D1=10 / D2=16) For encoder with solid shaft Article no.: 11034138	Backlash-free and angle-synchronous transmission of rotary movements Plug-in version Electric isolated Suitable for very high speeds Good compensation of all misalignments
	Spring washer coupling (D1=10 / D2=14) For encoder with solid shaft Article no.: 11034140	Backlash-free and angle-synchronous transmission of rotary movements Plug-in version Electric isolated Suitable for very high speeds Good compensation of all misalignments
	Spring washer coupling (D1=10 / D2=12) For encoder with solid shaft Article no.: 11034141	Backlash-free and angle-synchronous transmission of rotary movements Plug-in version Electric isolated Suitable for very high speeds Good compensation of all misalignments
	Bellows coupling (D1=06 / D2=10) For encoder with solid shaft Article no.: 11050507	Backlash-free angle-synchronous transmission Optimum compensation of misalignments Very high torsional spring stiffness Small restoring force Vibration damping Stainless steel bellows
	Double loops coupling (D1=10 / D2=10) For encoder with solid shaft Article no.: 11101781	Thermally and electrically isolated Absorbing shocks and vibration Excellent compensation of radial, lateral and angular misalignments Medium torsional stiffness Low restoring forces Maintenance-free
	Mounting adaptor For encoders with clamping flange Article no.: 10125051	Glass-fiber reinforced plastic Excellent resistance against temperature and chemicals Electrically isolated encoder mount
	Set of eccentric fixings type A Article no.: 11065545	With 3 eccentric fixings type A
	Spring encoder arm Article no.: 11101893	Tether arm for Ø58 mm with clamping flange Optimal for use encoders with measuring wheel Virtually any contact pressure adjustable Versatile mounting options

Connectors and cables

The selected altAttribute does not exist!

Female connector M23 with pin lock, 12-pin, CW

Article no.: 11141051

Connector M23: 12-pin, female, clockwise (CW). Suitable for cable connection to flange connector M23 (12-pin, male, counter-clockwise (CCW)).
Knurled nut with pin lock
EMC version
Temperature range -40...+100 °C

To the top

Incremental encoders

optoPulse ExEIL580-SC

Solid shaft with clamping flange

Technical data

Technical data - electrical ratings

Technical data - mechanical design

Downloads

Data sheet

Quickstart

Brochures / Catalogs

Declaration of conformity

CAD

Accessories

Mounting accessories

Connectors and cables