OT300.SL-GDZZJ.72CU

Article no.: 11240070

SmartReflect - Safe barrier principle without reflector
Distance measurement value via IO-Link
Manipulation-proof, simple teach-in via qTeach or line teach
Extended parameterization options and additional diagnostic data
Longest distances thanks to time of flight principle
Laser performance for an accurate switching behavior
Compact, miniaturized housing format

available on request

Technical data

show all

General data

Type

Light barrier

Version

Time of Flight

Sensing distance Tw

400 … 1800 mm

Scanning range Sa

85% ... 80% Sde

Temperature drift

± 15 mm

Linearity error

± 10 mm

Power on indication

LED green

Output indicator

LED yellow

Sensing distance adjustment

Teach-in and IO-Link

Distance to focus

700 mm

Suppression of reciprocal influence

Beam type

Point

Alignment optical axis

< 2°

Light Source

Light source

Pulsed red laser diode

Laser class

Wave length

680 nm

Electrical data

Response time / release time

< 4 ms (High Speed Mode)
< 8 ms (Standard Mode)
< 50 ms (Long Range Mode)

Voltage supply range +Vs

12 … 30 VDC

Current consumption max. (no load)

60 mA

Voltage drop Vd

<2 VDC

Output function

Dark operate, switchable

Output circuit

Push-pull / IO-Link

Output current

50 mA

Short circuit protection

Reverse polarity protection

Communication interface

Interface

IO-Link V1.1.3

Profile

DMSS

IO-Link port type

Class A

Baud rate

230.4 kBaud (COM 3)

Cycle time

≥ 2 ms

Process data length

32 Bit

Process data structure

Bit 0 = SSC1 (distance)
Bit 1 = SSC2 (distance)
Bit 2 = quality
Bit 3 = alarm
Bit 5 = SSC4 (counter)
Bit 8-15 = scale factor
Bit 16-31 = 16 Bit measurement

Adjustable parameters

Switching point
Switching hysteresis
Operation mode
Time filters
LED status indicators
Output logic
Output circuit
Counter
Deactivate the sensor element
Find Me function
Teach-in mode

Additional data

Distance
Excess gain
Operating cycles
Operating hours
Boot cycles
Operating voltage
Device temperature
Histograms

Mechanical data

Width / diameter

12.9 mm

Height / length

32.3 mm

Depth

23 mm

Design

Rectangular

Housing material

Plastic (ASA, PMMA)

Front (optics)

PMMA

Connection types

Cable 4 pin, 2 m

Ambient conditions

Protection class

IP 67

Operating temperature

-20 … +50 °C

Storage temperature

-40 … +70 °C

Vibration (sinusoidal)

IEC 60068-2-6:2008
10 g at f = 10 - 2000 Hz, duration 150 min per axis

Shock (semi-sinusoidal)

IEC 60068-2-27:2009
50 g / 11 ms, 10 impulses per axis and direction

3D-Model

show all

3D-Model

Generating CAD-Models requires an external login to CADENAS.

Software

show all

Software

Software - IODD V1.1 (OT300SL)
- (zip | 278 KB)

Downloads

show all

Data sheet

Data sheet – OT300.SL-GDZZJ.72CU
- FR (pdf | 1 MB)
Data sheet – OT300.SL-GDZZJ.72CU
- DE (pdf | 1 MB)
Data sheet – OT300.SL-GDZZJ.72CU
- EN (pdf | 1 MB)
Data sheet – OT300.SL-GDZZJ.72CU
- ZH (pdf | 1 MB)

Quickstart

- EN/DE/FR (pdf | 986 KB)

Certificates / approvals

- EN/DE/BG/CZ/DK/ES/FI/FR/GR/HU/IT/LT/LV/NL/NO/PL/PT/RO/SK/SI (pdf | 280 KB)

EPLAN

Link to dataportal
- Link to Data Portal

Diagrams

show all

Repeat Accuracy

The selected altAttribute does not exist!

(png | 96 KB)

(png | 145 KB)

(png | 144 KB)

Drawings

show all

Accessories

show all

Peripherals

	IO-Link Master PROFINET, 8-Port, IP67 Article no.: 11215447	IP67 field device 8 ports for integrating sensors via IO-Link or I/O 2 PROFINET ports Supports Modbus/TCP and OPC UA
	IO-Link Master EtherNet/IP, 8-Port, IP67 Article no.: 11215460	IP67 field device 8 ports for integrating sensors via IO-Link or I/O 2 EtherNet/IP ports Supports Modbus/TCP and OPC UA
	IO-Link Master PROFINET, 8-Port, IP20 Article no.: 11215445	IP20 control cabinet device 8 ports for integrating sensors via IO-Link or I/O 2 PROFINET ports Supports Modbus/TCP and OPC UA
	IO-Link Master EtherNet/IP, 8-Port, IP20 Article no.: 11215448	IP20 control cabinet device 8 ports for integrating sensors via IO-Link or I/O 2 EtherNet/IP ports Supports Modbus/TCP and OPC UA
	ZTEST-ALL.DIGITAL Test unit for sensors digital Article no.: 11084377	LED (red/green) for digital PNP/NPN signals Teach-in of sensors with integrated Teach- button Connection for plug in power supply (available as accessory)
	ZTEST-ALL.ANALOG Test unit for sensors analog & digital Article no.: 11084376	Output via display (V or mA) or LED (PNP/NPN) Teach-in of sensors with integrated Teach- button Connection for plug in power supply (available as accessory)
	USB-C IO-Link Master Article no.: 11234828	Compact IO-Link master perfectly suited for testing and getting to know IO-Link sensors Simple power supply via USB-C Quick and easy connection with the Baumer Sensor Suite Specifically designed with the needs of engineering and service in mind
	SensControl Wireless IO-Link Master Article no.: 11214576	On-site configuration and monitoring of IO-Link devices (sensors/actuators) Communication via WLAN, Bluetooth LE and IO-Link Power supply by integrated rechargeable battery Increased mobility and easy to use via SensControl app

Mounting accessories

	Sensofix O300/U300 Article no.: 11104963	Clamps made of stainless steel Ball pivots made of galvanized steel Mounting panel made of stainless steel
	Mounting bracket O300/U300 (L design) Article no.: 11102423	Material: Steel
	Mounting bracket O300 - Retrofit for sensors series 20 Article no.: 11124807	Material: Steel
	Mounting rod with mounting plate holder 200 mm Article no.: 11707685	Material: Aluminium Part of an assembly Different lengths available
	Mounting rod with mounting plate holder 300 mm Article no.: 11707686	Material: Aluminium Part of an assembly Different lengths available
	Mounting rod 200 mm Article no.: 11707688	Material: Aluminium Part of an assembly Different lengths available
	Mounting rod 250 mm Article no.: 11707697	Material: Aluminium Part of an assembly Different lengths available
	Mounting rod with mounting plate holder 250 mm Article no.: 11707698	Material: Aluminium Part of an assembly Different lengths available
	Mounting rod 300 mm Article no.: 11707687	Material: Aluminium Part of an assembly Different lengths available
	Mounting plate series 300 and ø12 mm Article no.: 11707701	Material: Steel Part of an assembly
	Mounting base Article no.: 11707702	Material: Plastic (PA) Part of an assembly
	Two-way connector Article no.: 11707703	Material: Plastic (PA) Part of an assembly