O200.RL.C-GW2I.72CV/A014_FIN1_H006

Article no.: 11231200

Extended functional reserve capacities for maximum reliability
Object detection through smallest holes and gaps without blind area thanks to single-lens optics
Parallel laser beam for uniform detection over the measuring range
IO-Link interface independent of the switching output (Dual Channel)
Extended parameterization options and additional diagnostic data
Quick mounting by means of M3 threaded bushes made of stainless steel

available on request

Technical data

show all

General data

Type

Retro-reflective sensor

Version

Single lens optics
IO-Link dual channel

Light source

Pulsed red laser diode

Actual range Sb

0.8 m

Nominal range Sn

1.2 m

Smallest object recognizable typ.

3 mm at 500 mm

Polarization filter

Alignment / soiled lens indicator

Flashing output indicator

Output indicator

LED yellow

Power on indication

LED green

Sensitivity adjustment

IO-Link

Laser class

Distance to focus

Parallel beam

Wave length

680 nm

Suppression of reciprocal influence

Alignment optical axis

< 1,5°

Electrical data

Response time / release time

< 0.2 ms (High Speed Mode)

Jitter

< 0.18 ms (High Speed Mode)

Voltage supply range +Vs

10 … 30 VDC

Current consumption max. (no load)

20 mA (@ 10 VDC)

Current consumption typ.

10 mA (@ 24 VDC)

Voltage drop Vd

<2 VDC

Output function

Light / dark operate

Output circuit

Push-pull

Output current

50 mA (< 40 °C), sum of all outputs
20 mA (< 50 °C), sum of all outputs

Short circuit protection

Reverse polarity protection

Communication interface

Baud rate

38.4 kBaud (COM 2)

Adjustable parameters

Switching point
Time filters
LED status indicators
Output logic
Output circuit
Counter
Operation mode
Deactivate the sensor element
Find Me function
Teach-in mode

IO-Link port type

Class A

Process data length

32 Bit

Process data structure

Bit 0 = SSC1 (presence)
Bit 2 = quality
Bit 3 = alarm
Bit 5 = SSC4 (counter)
Bit 16-31 = 16 Bit measurement

Interface

IO-Link V1.1

Additional data

Signal strength
Excess gain
Operating cycles
Device temperature

Cycle time

≥ 2.7 ms

Mechanical data

Width / diameter

8 mm

Height / length

25.1 mm

Depth

15.8 mm

Design

Rectangular

Mechanical mounting

Threaded sleeves M3 (stainless steel)

Housing material

Plastic (ASA, PMMA)

Front (optics)

PMMA

Connection types

Cable 4 pin, 2 m

Cable characteristics

PVC / PVC 4 x 0.08 mm²

Ambient conditions

Operating temperature

-20 … +50 °C

Protection class

IP 67

3D-Model

show all

3D-Model

Generating CAD-Models requires an external login to CADENAS.

Software

show all

Software

Software – IODD V1.1 (O200x.RL A014)
- (zip | 259 KB)

Downloads

show all

Data sheet

Data sheet – O200.RL.C-GW2I.72CV/A014_FIN1_H006
- ZH (pdf | 1 MB)
Data sheet – O200.RL.C-GW2I.72CV/A014_FIN1_H006
- FR (pdf | 1 MB)
Data sheet – O200.RL.C-GW2I.72CV/A014_FIN1_H006
- DE (pdf | 1 MB)
Data sheet – O200.RL.C-GW2I.72CV/A014_FIN1_H006
- EN (pdf | 1 MB)

Operating Manual

Quickstart – O200 Fixed Settings
- EN/DE/FR/ES/IT/ZH (pdf | 405 KB)

Software Manual

Operating instruction – O200 IO-Link
- EN (pdf | 1 MB)

Certificates / approvals

DoC / CoC - O200
- EN/DE/BG/CZ/DK/ES/FI/FR/GR/HU/IT/LT/LV/NL/NO/PL/PT/RO/SK/SI (pdf | 185 KB)

EPLAN

Link to dataportal
- Link to Data Portal

Diagrams

show all

Excess gain curve

The selected altAttribute does not exist!

(png | 140 KB)

Drawings

show all

Accessories

show all

Reflectors

	FTDR 048U048 Reflector rectangular 60 x 51 mm Article no.: 11229661	Fastening method screw mounting For Retro-reflective sensors Ultrafine micro structure For laser light sensors and transparent object detection
	FTDR 020U020 Reflector rectangular 32 x 20 mm Article no.: 11229662	Fastening method screw mounting For Retro-reflective sensors Ultrafine micro structure For laser light sensors and transparent object detection
	FTDF 025U025 Reflective tape rectangular 25 x 25 mm Article no.: 11229663	Fastening method self-adhesive For Retro-reflective sensors Ultrafine micro structure For laser light sensors and transparent object detection
	FTDF 040U250 Reflector rectangular 250 x 40 mm Article no.: 11117727	Fastening method self-adhesive For Retro-reflective sensors Ultrafine micro structure For laser light sensors and transparent object detection

Peripherals

	ZTEST-ALL.DIGITAL Test unit for sensors digital Article no.: 11084377	LED (red/green) for digital PNP/NPN signals Teach-in of sensors with integrated Teach- button Connection for plug in power supply (available as accessory)
	ZTEST-ALL.ANALOG Test unit for sensors analog & digital Article no.: 11084376	Output via display (V or mA) or LED (PNP/NPN) Teach-in of sensors with integrated Teach- button Connection for plug in power supply (available as accessory)
	USB-C IO-Link Master Article no.: 11234828	Compact IO-Link master perfectly suited for testing and getting to know IO-Link sensors Simple power supply via USB-C Quick and easy connection with the Baumer Sensor Suite Specifically designed with the needs of engineering and service in mind

Mounting accessories

	10150326 Sensofix series 10 / series 20 Article no.: 10150326	Clamps made of stainless steel Ball pivots made of galvanized steel Mounting panel made of stainless steel
	ZADAP-200.STRAIGHT Mounting bracket O200 Article no.: 11206601	Material: stainless steel Content: Mounting bracket including screws/nuts for sensors with smooth and M3 threaded sleeves
	ZADAP-200.ANGLE_L Mounting bracket O200 (L design) Article no.: 11206602	Material: stainless steel Content: Mounting bracket including screws/nuts for sensors with smooth and M3 threaded sleeves
	ZADAP-200.ANGLE_S Mounting bracket O200 (S design) Article no.: 11206603	Material: stainless steel Content: Mounting bracket including screws/nuts for sensors with smooth and M3 threaded sleeves
	ZADAP-200.SERIES10 Mounting bracket O200 - Retrofit for sensors series 10 Article no.: 11208477	Material: plastic