HOG 10 + ESL 93

Montageset zum Anbau einer Drehmomentstütze Grösse M6 und zur Befestigung eines Erdungsbandes.

Montage- und Demontageset zur Befestigung eines einseitig offenen Dehgebers mit der Antriebswelle und zur Demontage des Gebers von der Antriebswelle.

• Torque arm for hollow shaft encoder
• Swivel joints size M6 according to DIN ISO 12240-4, size series K
• Compensate for mounting tolerances of the drive shaft in an axial direction
• Standard version
• Length 67...70 mm

• Torque arm for hollow shaft encoder
• Swivel joints size M6 according to DIN ISO 12240-4, size series K
• Compensate for mounting tolerances of the drive shaft in an axial direction
• Standard version
• Length 120...130 mm
• Can be shortened to ≥71 mm

• Torque arm for hollow shaft encoder
• Swivel joints size M6 according to DIN ISO 12240-4, size series K
• Compensate for mounting tolerances of the drive shaft in an axial direction
• Standard version
• Length 425...460 mm
• Can be shortened to ≥131 mm

• Torque arm for hollow shaft encoder
• Swivel joints size M6 according to DIN ISO 12240-4, size series K
• Compensate for mounting tolerances of the drive shaft in an axial direction
• Insulated version
• Length 67...70 mm

• Torque arm for hollow shaft encoder
• Swivel joints size M6 according to DIN ISO 12240-4, size series K
• Compensate for mounting tolerances of the drive shaft in an axial direction
• Insulated version
• Length 120...130 mm
• Can be shortened to ≥71 mm

• Torque arm for hollow shaft encoder
• Swivel joints size M6 according to DIN ISO 12240-4, size series K
• Compensate for mounting tolerances of the drive shaft in an axial direction
• Insulated version
• Length 425...460 mm
• Can be shortened to ≥131 mm

The sensor cable HEK 8 is a proven industrial product designed to match high demands. It is halogen free and its rugged outer construction allows it to be pulled and dragged in free conditions. It is certified to UL 20233. The cable can be supplied in any length and pre-fitted with various connectors.

• Switch relay box for switching high voltages and currents for the electrical speed switch ES(L) 93
• Triggering is carried out by the transistor outputs of the ES(L) 93
• The ES 93 R also conditions an externally supplied AC or DC low voltage